Configuration of the battery cell (e.g., minimum and maximum cell voltage) More...

#include <stdint.h>

Include dependency graph for panasonic_ncr18650bd.h:

Macros
#define	BC_VOLTAGE_NOMINAL_mV (3600u)

#define	BC_VOLTAGE_DEEP_DISCHARGE_mV (BC_VOLTAGE_MIN_MSL_mV - 100u)

#define	BC_CAPACITY_mAh (3180u)
	the cell capacity used for SOC calculation, in this case Ah counting More...


#define	BC_TEMPERATURE_MAX_DISCHARGE_MSL_ddegC (600)

#define	BC_TEMPERATURE_MAX_DISCHARGE_RSL_ddegC (550)

#define	BC_TEMPERATURE_MAX_DISCHARGE_MOL_ddegC (500)


#define	BC_TEMPERATURE_MIN_DISCHARGE_MSL_ddegC (-200)

#define	BC_TEMPERATURE_MIN_DISCHARGE_RSL_ddegC (-180)

#define	BC_TEMPERATURE_MIN_DISCHARGE_MOL_ddegC (-150)


#define	BC_TEMPERATURE_MAX_CHARGE_MSL_ddegC (450)

#define	BC_TEMPERATURE_MAX_CHARGE_RSL_ddegC (400)

#define	BC_TEMPERATURE_MAX_CHARGE_MOL_ddegC (350)


#define	BC_TEMPERATURE_MIN_CHARGE_MSL_ddegC (100)

#define	BC_TEMPERATURE_MIN_CHARGE_RSL_ddegC (120)

#define	BC_TEMPERATURE_MIN_CHARGE_MOL_ddegC (150)


#define	BC_VOLTAGE_MAX_MSL_mV (4200u)

#define	BC_VOLTAGE_MAX_RSL_mV (4150u)

#define	BC_VOLTAGE_MAX_MOL_mV (4100u)


#define	BC_VOLTAGE_MIN_MSL_mV (2500u)

#define	BC_VOLTAGE_MIN_RSL_mV (2550u)

#define	BC_VOLTAGE_MIN_MOL_mV (2600u)


#define	BC_CURRENT_MAX_DISCHARGE_MSL_mA (550000u)

#define	BC_CURRENT_MAX_DISCHARGE_RSL_mA (525000u)

#define	BC_CURRENT_MAX_DISCHARGE_MOL_mA (500000u)


#define	BC_CURRENT_MAX_CHARGE_MSL_mA (50000u)

#define	BC_CURRENT_MAX_CHARGE_RSL_mA (47500u)

#define	BC_CURRENT_MAX_CHARGE_MOL_mA (45000u)

Detailed Description

Configuration of the battery cell (e.g., minimum and maximum cell voltage)

Copyright: © 2010 - 2023, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V. All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:

″This product uses parts of foxBMS®″
″This product includes parts of foxBMS®″
″This product is derived from foxBMS®″

Author: foxBMS Team

Date: 2018-10-02 (date of creation)

Updated: 2023-02-23 (date of last update)

Version: v1.5.1

Prefix: BC

This files contains basic macros of the battery cell in order to derive needed inputs in other parts of the software. These macros are all depended on the hardware.

Definition in file panasonic_ncr18650bd.h.

Macro Definition Documentation

◆ BC_CAPACITY_mAh

#define BC_CAPACITY_mAh (3180u)

the cell capacity used for SOC calculation, in this case Ah counting

Type: int

Unit: mAh

Definition at line 199 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_CHARGE_MOL_mA

#define BC_CURRENT_MAX_CHARGE_MOL_mA (45000u)

the different strings

Definition at line 191 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_CHARGE_MSL_mA

#define BC_CURRENT_MAX_CHARGE_MSL_mA (50000u)

Maximum charge current limit. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: mA 6 modules (7s20p) in series, 3 strings in parallel

Definition at line 189 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_CHARGE_RSL_mA

#define BC_CURRENT_MAX_CHARGE_RSL_mA (47500u)

current reduced by 4,54 A because of imbalances between

Definition at line 190 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_DISCHARGE_MOL_mA

#define BC_CURRENT_MAX_DISCHARGE_MOL_mA (500000u)

the different strings

Definition at line 177 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_DISCHARGE_MSL_mA

#define BC_CURRENT_MAX_DISCHARGE_MSL_mA (550000u)

Maximum discharge current limit. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: mA 6 modules (7s20p) in series, 3 strings in parallel

Definition at line 175 of file panasonic_ncr18650bd.h.

◆ BC_CURRENT_MAX_DISCHARGE_RSL_mA

#define BC_CURRENT_MAX_DISCHARGE_RSL_mA (525000u)

current reduced by 50 A because of imbalances between

Definition at line 176 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_CHARGE_MOL_ddegC

#define BC_TEMPERATURE_MAX_CHARGE_MOL_ddegC (350)

Maximum temperature limit during charge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 105 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_CHARGE_MSL_ddegC

#define BC_TEMPERATURE_MAX_CHARGE_MSL_ddegC (450)

Maximum temperature limit during charge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 103 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_CHARGE_RSL_ddegC

#define BC_TEMPERATURE_MAX_CHARGE_RSL_ddegC (400)

Maximum temperature limit during charge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 104 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_DISCHARGE_MOL_ddegC

#define BC_TEMPERATURE_MAX_DISCHARGE_MOL_ddegC (500)

Maximum temperature limit during discharge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 77 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_DISCHARGE_MSL_ddegC

#define BC_TEMPERATURE_MAX_DISCHARGE_MSL_ddegC (600)

Maximum temperature limit during discharge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 75 of file panasonic_ncr18650bd.h.

◆ BC_TEMPERATURE_MAX_DISCHARGE_RSL_ddegC

#define BC_TEMPERATURE_MAX_DISCHARGE_RSL_ddegC (550)

Maximum temperature limit during discharge. When maximum safety limit (MSL) is violated, error state is requested and contactors will open. When recommended safety limit (RSL) or maximum operating limit (MOL) is violated, the respective flag will be set.

Type: int

Unit: deci °C

Definition at line 76 of file panasonic_ncr18650bd.h.