foxBMS - Unit Tests  1.2.0
The foxBMS Unit Tests API Documentation
interlock_cfg.h
Go to the documentation of this file.
1 /**
2  *
3  * @copyright © 2010 - 2021, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V.
4  * All rights reserved.
5  *
6  * SPDX-License-Identifier: BSD-3-Clause
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright notice, this
12  * list of conditions and the following disclaimer.
13  *
14  * 2. Redistributions in binary form must reproduce the above copyright notice,
15  * this list of conditions and the following disclaimer in the documentation
16  * and/or other materials provided with the distribution.
17  *
18  * 3. Neither the name of the copyright holder nor the names of its
19  * contributors may be used to endorse or promote products derived from
20  * this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
23  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
25  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
28  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
29  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
30  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  * We kindly request you to use one or more of the following phrases to refer to
34  * foxBMS in your hardware, software, documentation or advertising materials:
35  *
36  * - ″This product uses parts of foxBMS®″
37  * - ″This product includes parts of foxBMS®″
38  * - ″This product is derived from foxBMS®″
39  *
40  */
41 
42 /**
43  * @file interlock_cfg.h
44  * @author foxBMS Team
45  * @date 2020-02-24 (date of creation)
46  * @updated 2021-10-18 (date of last update)
47  * @ingroup DRIVERS_CONFIGURATION
48  * @prefix ILCK
49  *
50  * @brief Header for the configuration for the driver for the interlock
51  *
52  */
53 
54 #ifndef FOXBMS__INTERLOCK_CFG_H_
55 #define FOXBMS__INTERLOCK_CFG_H_
56 
57 /*========== Includes =======================================================*/
58 #include "general.h"
59 
60 #include "HL_het.h"
61 
62 /*========== Macros and Definitions =========================================*/
63 
64 /** IO register to which the interlock is connected */
65 #define ILCK_IO_REG_DIR (hetREG1->DIR)
66 /** IO port for interlock related pins */
67 #define ILCK_IO_REG_PORT (hetREG1)
68 
69 /** Enable pin for diagnostic power supply */
70 #define ILCK_INTERLOCK_CONTROL_PIN_IL_HS_ENABLE (30u)
71 
72 /** Defines the pin where interlock feedback pin is connected to the mcu */
73 #define ILCK_INTERLOCK_FEEDBACK_PIN_IL_STATE (29u)
74 
75 /* Defines to which ADC input the interlock circuitry is connected to */
76 /** High-side voltage sense signal connected to ADC input 2 (IL_HS_VS) */
77 #define ILCK_ADC_INPUT_HIGH_SIDE_VOLTAGE_SENSE (2u)
78 /** Low-side voltage sense signal connected to ADC input 3 (IL_LS_VS) */
79 #define ILCK_ADC_INPUT_LOW_SIDE_VOLTAGE_SENSE (3u)
80 /** High-side current sense signal connected to ADC input 4 (IL_HS_CS) */
81 #define ILCK_ADC_INPUT_HIGH_SIDE_CURRENT_SENSE (4u)
82 /** Low-side current sense signal connected to ADC input 5 (IL_LS_CS) */
83 #define ILCK_ADC_INPUT_LOW_SIDE_CURRENT_SENSE (5u)
84 
85 /** Factor of resistor divider used for measuring the low- and high-side
86  * interlock voltages. Used resistor values are 5k6 ohm and 3k9 ohm. */
87 #define ILCK_VOLTAGE_DIVIDER_FACTOR ((5.6f + 3.9f) / 3.9f)
88 
89 /**
90  * Conversion factor for interlock current IL_HS_CS
91  * 2k49 ohm is the resistance through which sense current flows
92  * 80 is the (output current / sense current) ratio of high-side power switch
93  * TPS2H000-Q1 Datasheet SLVSD72D ?DECEMBER 2015?REVISED DECEMBER 2019 p.8
94  */
95 #define ILCK_FACTOR_IL_HS_CS_1_ohm (80.0f / 2049.0f)
96 
97 /** Linear conversion factor for low-side interlock current measurement
98  * (IL_LS_CS). Measurement performed via 2 ohm shunt with a gain of 20V/V */
99 #define ILCK_FACTOR_IL_LS_CS_1_ohm (0.025f)
100 
101 /**
102  * @brief ILCK statemachine short time definition in #ILCK_Trigger() calls
103  * until next state/substate is processed
104  */
105 #define ILCK_STATEMACH_SHORTTIME (1u)
106 
107 /** Symbolic names for contactors' possible states */
109  ILCK_SWITCH_OFF, /*!< Contactor off --> Contactor is open */
110  ILCK_SWITCH_ON, /*!< Contactor on --> Contactor is closed */
111  ILCK_SWITCH_UNDEF, /*!< Contactor undefined --> Contactor state not known */
113 
114 /*========== Extern Constant and Variable Declarations ======================*/
115 
116 /*========== Extern Function Prototypes =====================================*/
117 
118 /*========== Externalized Static Functions Prototypes (Unit Test) ===========*/
119 
120 #endif /* FOXBMS__INTERLOCK_CFG_H_ */
General macros and definitions for the whole platform.
ILCK_ELECTRICAL_STATE_TYPE
@ ILCK_SWITCH_ON
@ ILCK_SWITCH_UNDEF
@ ILCK_SWITCH_OFF
enum ILCK_ELECTRICAL_STATE_TYPE ILCK_ELECTRICAL_STATE_TYPE_e