test_nxpfs85xx.c

Go to the documentation of this file.

/**
 *
 * @copyright © 2010 - 2021, Fraunhofer-Gesellschaft zur Foerderung der
 *  angewandten Forschung e.V. All rights reserved.
 *
 * BSD 3-Clause License
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 * 1.  Redistributions of source code must retain the above copyright notice,
 *     this list of conditions and the following disclaimer.
 * 2.  Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 * 3.  Neither the name of the copyright holder nor the names of its
 *     contributors may be used to endorse or promote products derived from
 *     this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * We kindly request you to use one or more of the following phrases to refer
 * to foxBMS in your hardware, software, documentation or advertising
 * materials:
 *
 * ″This product uses parts of foxBMS®″
 *
 * ″This product includes parts of foxBMS®″
 *
 * ″This product is derived from foxBMS®″
 *
 */
 
/**
 * @file    test_nxpfs85xx.c
 * @author  foxBMS Team
 * @date    2020-04-06 (date of creation)
 * @updated 2021-03-24 (date of last update)
 * @ingroup UNIT_TEST_IMPLEMENTATION
 * @prefix  SBC
 *
 * @brief   Tests for the sbc module
 *
 */
 
/*========== Includes =======================================================*/
#include "unity.h"
#include "Mockdiag.h"
#include "Mockdma.h"
#include "Mockfassert.h"
#include "Mockfram.h"
#include "Mockio.h"
#include "Mockmasterinfo.h"
#include "Mockmcu.h"
#include "Mocksbc_fs8x.h"
#include "Mocksbc_fs8x_communication.h"
#include "Mockspi.h"
 
/* #include "nxpfs85xx.h"  can't be included because of call of FSYS_SwitchToUserMode */
 
TEST_FILE("nxpfs85xx.c")
 
/*========== Definitions and Implementations for Unit Test ==================*/
 
static const spiDAT1_t spi_kSbcDataConfig = {
    /* struct is implemented in the TI HAL and uses uppercase true and false */
    .CS_HOLD = FALSE,     /* The HW chip select signal is deactivated */
    .WDEL    = TRUE,      /* No delay will be inserted */
    .DFSEL   = SPI_FMT_0, /* Data word format select */
    .CSNR    = 0x0,       /* Chip select (CS) number; 0x01h for CS[0] */
};
 
SPI_INTERFACE_CONFIG_s spi_kSbcMcuInterface = {
    .channel  = SPI_Interface2,
    .pConfig  = &spi_kSbcDataConfig,
    .pNode    = spiREG2,
    .pGioPort = &(spiREG2->PC3),
    .csPin    = 0u,
};
 
FRAM_SBC_INIT_s fram_sbcInit = {
    .phase    = 0u,
    .finState = STD_NOT_OK,
};
 
long FSYS_RaisePrivilege(void) {
    return 0;
}
 
/*========== Setup and Teardown =============================================*/
void setUp(void) {
}
 
void tearDown(void) {
}
 
/*========== Test Cases =====================================================*/
 
void testDoSomething(void) {
}