test_bal_strategy_voltage.c

Go to the documentation of this file.

/**
 *
 * @copyright © 2010 - 2021, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V.
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * We kindly request you to use one or more of the following phrases to refer to
 * foxBMS in your hardware, software, documentation or advertising materials:
 *
 * - ″This product uses parts of foxBMS®″
 * - ″This product includes parts of foxBMS®″
 * - ″This product is derived from foxBMS®″
 *
 */
 
/**
 * @file    test_bal_strategy_voltage.c
 * @author  foxBMS Team
 * @date    2020-06-05 (date of creation)
 * @updated 2020-08-03 (date of last update)
 * @ingroup UNIT_TEST_IMPLEMENTATION
 * @prefix  TEST
 *
 * @brief   Test of the voltage based balancing module
 *
 */
 
/*========== Includes =======================================================*/
#include "unity.h"
#include "Mockbattery_system_cfg.h"
#include "Mockbms.h"
#include "Mockdatabase.h"
#include "Mockfassert.h"
#include "Mockfram.h"
#include "Mockio.h"
#include "Mockmcu.h"
#include "Mockos.h"
#include "Mockspi.h"
 
#include "database_cfg.h"
 
#include "bal.h"
#include "bal_strategy_voltage.h"
 
/*========== Definitions and Implementations for Unit Test ==================*/
 
/*========== Setup and Teardown =============================================*/
void setUp(void) {
}
 
void tearDown(void) {
}
 
/*========== Test Cases =====================================================*/
void testCheckBalancingInitByDisablingBalancing(void) {
    DATA_BLOCK_BALANCING_CONTROL_s *pBalancing = TEST_BAL_GetBalancingControl();
    pBalancing->enableBalancing                = 1;
    DATA_Read_1_DataBlock_IgnoreAndReturn(STD_OK);
    DATA_Write_1_DataBlock_IgnoreAndReturn(STD_OK);
    BAL_Init(pBalancing);
    TEST_ASSERT_EQUAL(0, pBalancing->enableBalancing);
}
 
void testBalancingGetState(void) {
    BAL_STATE_s *balancingState = TEST_BAL_GetBalancingState();
    balancingState->state       = BAL_STATEMACH_UNINITIALIZED;
    TEST_ASSERT_EQUAL(BAL_STATEMACH_UNINITIALIZED, BAL_GetState());
    balancingState->state = BAL_STATEMACH_INITIALIZED;
    TEST_ASSERT_EQUAL(BAL_STATEMACH_INITIALIZED, BAL_GetState());
}
 
void testBalancingFinished(void) {
    BAL_STATE_s *balancingState            = TEST_BAL_GetBalancingState();
    balancingState->initializationFinished = STD_NOT_OK;
    TEST_ASSERT_EQUAL(STD_NOT_OK, BAL_GetInitializationState());
    balancingState->initializationFinished = STD_OK;
    TEST_ASSERT_EQUAL(STD_OK, BAL_GetInitializationState());
}