foxBMS  Unit Tests
1.3.0
The foxBMS Unit Tests API Documentation

Resistive divider used for measuring temperature. More...
Go to the source code of this file.
Macros  
#define  TS_EPCOS_B57861S0103F045_ADC_VOLTAGE_V_MAX_V (float)((TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_SUPPLY_VOLTAGE_V * ts_b57861s0103f045Lut[ts_b57861s0103f045LutSize1].resistance_Ohm) / (ts_b57861s0103f045Lut[ts_b57861s0103f045LutSize1].resistance_Ohm+TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_RESISTANCE_R_1_R_2_Ohm)) 
Defines for calculating the ADC voltage on the ends of the operating range. More...  
#define  TS_EPCOS_B57861S0103F045_ADC_VOLTAGE_V_MIN_V (float)((TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_SUPPLY_VOLTAGE_V * ts_b57861s0103f045Lut[0].resistance_Ohm) / (ts_b57861s0103f045Lut[0].resistance_Ohm+TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_RESISTANCE_R_1_R_2_Ohm)) 
Defines for calculating the ADC voltage on the ends of the operating range. More...  
Functions  
int16_t  TS_Epc01GetTemperatureFromLut (uint16_t adcVoltage_mV) 
returns temperature based on measured ADC voltage More...  
int16_t  TS_Epc01GetTemperatureFromPolynomial (uint16_t adcVoltage_mV) 
returns temperature based on measured ADC voltage More...  
Variables  
static const TS_TEMPERATURE_SENSOR_LUT_s  ts_b57861s0103f045Lut [] 
static uint16_t  ts_b57861s0103f045LutSize = sizeof(ts_b57861s0103f045Lut) / sizeof(TS_TEMPERATURE_SENSOR_LUT_s) 
Resistive divider used for measuring temperature.
SPDXLicenseIdentifier: BSD3Clause
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:
Definition in file epcos_b57861s0103f045.c.
#define TS_EPCOS_B57861S0103F045_ADC_VOLTAGE_V_MAX_V (float)((TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_SUPPLY_VOLTAGE_V * ts_b57861s0103f045Lut[ts_b57861s0103f045LutSize1].resistance_Ohm) / (ts_b57861s0103f045Lut[ts_b57861s0103f045LutSize1].resistance_Ohm+TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_RESISTANCE_R_1_R_2_Ohm)) 
Defines for calculating the ADC voltage on the ends of the operating range.
The ADC voltage is calculated with the following formula:
V_adc = ((V_supply * R_ntc) / (R + R_ntc)) Depending on the position of the NTC in the voltage resistor (R1/R2), different R_ntc values are used for the calculation.
Definition at line 129 of file epcos_b57861s0103f045.c.
#define TS_EPCOS_B57861S0103F045_ADC_VOLTAGE_V_MIN_V (float)((TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_SUPPLY_VOLTAGE_V * ts_b57861s0103f045Lut[0].resistance_Ohm) / (ts_b57861s0103f045Lut[0].resistance_Ohm+TS_EPCOS_B57861S0103F045_RESISTOR_DIVIDER_RESISTANCE_R_1_R_2_Ohm)) 
Defines for calculating the ADC voltage on the ends of the operating range.
The ADC voltage is calculated with the following formula:
V_adc = ((V_supply * R_ntc) / (R + R_ntc)) Depending on the position of the NTC in the voltage resistor (R1/R2), different R_ntc values are used for the calculation.
Definition at line 131 of file epcos_b57861s0103f045.c.
int16_t TS_Epc01GetTemperatureFromLut  (  uint16_t  adcVoltage_mV  ) 
returns temperature based on measured ADC voltage
adcVoltage_mV  voltage in mV 
Definition at line 147 of file epcos_b57861s0103f045.c.
int16_t TS_Epc01GetTemperatureFromPolynomial  (  uint16_t  adcVoltage_mV  ) 
returns temperature based on measured ADC voltage
adcVoltage_mV  voltage in mV 
Definition at line 197 of file epcos_b57861s0103f045.c.

static 
LUT filled from higher resistance to lower resistance
Definition at line 67 of file epcos_b57861s0103f045.c.

static 
size of the ts_b57861s0103f045Lut LUT
Definition at line 115 of file epcos_b57861s0103f045.c.