foxBMS - Unit Tests  1.4.1
The foxBMS Unit Tests API Documentation
mxm_register_map.h File Reference

Register map of the MAX1785x monitoring IC. More...

#include "general.h"
Include dependency graph for mxm_register_map.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define MXM_REG_BIT_DEFN(start, end)   ((MXM_REG_BM)(((MXM_REG_BM)1u << ((end) - (start) + 1u)) - 1u) << (start))
 Define enumeration values for bitmasks. More...
 
#define MXM_BM_NULL   ((MXM_REG_BM)0x00u)
 Monitoring Register Null byte. More...
 
#define MXM_BM_LSB   ((MXM_REG_BM)MXM_REG_BIT_DEFN(0u, 7u))
 Monitoring Register LSB. More...
 
#define MXM_BM_MSB   ((MXM_REG_BM)MXM_REG_BIT_DEFN(8u, 15u))
 Monitoring Register MSB. More...
 
#define MXM_BM_WHOLE_REG   ((MXM_REG_BM)0xFFFFu)
 All bits of monitoring register. More...
 
#define MXM_REG_VERSION_MOD   ((MXM_REG_BM)MXM_REG_BIT_DEFN(4u, 15u))
 Monitoring Register Version/Model. More...
 
#define MXM_REG_VERSION_VER   ((MXM_REG_BM)MXM_REG_BIT_DEFN(0u, 3u))
 Monitoring Register Version/Silicon Version. More...
 
#define MXM_REG_ADC_14BIT_VALUE   ((MXM_REG_BM)MXM_REG_BIT_DEFN(2u, 15u))
 Monitoring Register 14bit ADC value. More...
 
#define MXM_REG_STATUS1_ALRTRST   ((MXM_REG_BM)((MXM_REG_BM)(1u) << (14u)))
 ALRTRST bit in STATUS1. More...
 
#define MXM_REG_STATUS1_ALRTINTRFC   ((MXM_REG_BM)((1u) << (4u)))
 ALRTINTRFC bit in STATUS1. More...
 

Typedefs

typedef uint16_t MXM_REG_BM
 Type for register access for monitoring ICs. More...
 

Enumerations

enum  MXM_REG_NAME_e {
  MXM_REG_VERSION = 0x00u , MXM_REG_ADDRESS = 0x01u , MXM_REG_STATUS1 = 0x02u , MXM_REG_STATUS2 = 0x03u ,
  MXM_REG_STATUS3 = 0x04u , MXM_REG_FMEA1 = 0x05u , MXM_REG_FMEA2 = 0x06u , MXM_REG_ALRTSUM = 0x07u ,
  MXM_REG_ALRTOVCELL = 0x08u , MXM_REG_ALRTUVCELL = 0x09u , MXM_REG_MINMAXCELL = 0x0Au , MXM_REG_ALRTAUXPRTCT = 0x0Bu ,
  MXM_REG_ALRTAUXOV = 0x0Cu , MXM_REG_ALRTAUXUV = 0x0Du , MXM_REG_ALRTCOMPOV = 0x0Eu , MXM_REG_ALRTCOMPUV = 0x0Fu ,
  MXM_REG_ALRTCOMPAUXOV = 0x10u , MXM_REG_ALRTCOMPAUXUV = 0x11u , MXM_REG_ALRTBALSW = 0x12u , MXM_REG_SWACTION = 0x13u ,
  MXM_REG_DEVCFG1 = 0x14u , MXM_REG_DEVCFG2 = 0x15u , MXM_REG_AUXGPIOCFG = 0x16u , MXM_REG_GPIOCFG = 0x17u ,
  MXM_REG_PACKCFG = 0x18u , MXM_REG_ALRTIRQEN = 0x19u , MXM_REG_ALRTOVEN = 0x1Au , MXM_REG_ALRTUVEN = 0x1Bu ,
  MXM_REG_ALRTAUXOVEN = 0x1Cu , MXM_REG_ALRTAUXUVEN = 0x1Du , MXM_REG_ALRTCALTST = 0x1Eu , MXM_REG_OVTHCLR = 0x1Fu ,
  MXM_REG_OVTHSET = 0x20u , MXM_REG_UVTHCLR = 0x21u , MXM_REG_UVTHSET = 0x22u , MXM_REG_MSMTCH = 0x23u ,
  MXM_REG_BIPOVTHCLR = 0x24u , MXM_REG_BIPOVTHSET = 0x25u , MXM_REG_BIPUVTHCLR = 0x26u , MXM_REG_BIPUVTHSET = 0x27u ,
  MXM_REG_BLKOVTHCLR = 0x28u , MXM_REG_BLKOVTHSET = 0x29u , MXM_REG_BLKUVTHCLR = 0x2Au , MXM_REG_BLKUVTHSET = 0x2Bu ,
  MXM_REG_CSAOVTHCLR = 0x2Cu , MXM_REG_CSAOVTHSET = 0x2Du , MXM_REG_CSAUVTHCLR = 0x2Eu , MXM_REG_CSAUVTHSET = 0x2Fu ,
  MXM_REG_AUXROVTHCLR = 0x30u , MXM_REG_AUXROVTHSET = 0x31u , MXM_REG_AUXRUVTHCLR = 0x32u , MXM_REG_AUXRUVTHSET = 0x33u ,
  MXM_REG_AUXOVTHCLR = 0x34u , MXM_REG_AUXAOVTHSET = 0x35u , MXM_REG_AUXAUVTHCLR = 0x36u , MXM_REG_AUXAUVTHSET = 0x37u ,
  MXM_REG_COMPOVTH = 0x38u , MXM_REG_COMPUVTH = 0x39u , MXM_REG_COMPAUXROVTH = 0x3Au , MXM_REG_COMPAUXRUVTH = 0x3Bu ,
  MXM_REG_COMPAUXAOVTH = 0x3Cu , MXM_REG_COMPAUXAUVTH = 0x3Du , MXM_REG_COMPOPNTH = 0x3Eu , MXM_REG_COMPAUXROPNTH = 0x3Fu ,
  MXM_REG_COMPAUXAOPNTH = 0x40u , MXM_REG_COMPACCOVTH = 0x41u , MXM_REG_COMPACCUVTH = 0x42u , MXM_REG_BALSHRTTHR = 0x43u ,
  MXM_REG_BALLOWTHR = 0x44u , MXM_REG_BALHIGHTHR = 0x45u , MXM_REG_CSA = 0x46u , MXM_REG_CELL1 = 0x47u ,
  MXM_REG_CELL2 = 0x48u , MXM_REG_CELL3 = 0x49u , MXM_REG_CELL4 = 0x4Au , MXM_REG_CELL5 = 0x4Bu ,
  MXM_REG_CELL6 = 0x4Cu , MXM_REG_CELL7 = 0x4Du , MXM_REG_CELL8 = 0x4Eu , MXM_REG_CELL9 = 0x4Fu ,
  MXM_REG_CELL10 = 0x50u , MXM_REG_CELL11 = 0x51u , MXM_REG_CELL12 = 0x52u , MXM_REG_CELL13 = 0x53u ,
  MXM_REG_CELL14 = 0x54u , MXM_REG_BLOCK = 0x55u , MXM_REG_TOTAL = 0x56u , MXM_REG_DIAG1 = 0x57u ,
  MXM_REG_DIAG2 = 0x58u , MXM_REG_AUX0 = 0x59u , MXM_REG_AUX1 = 0x5Au , MXM_REG_AUX2 = 0x5Bu ,
  MXM_REG_AUX3 = 0x5Cu , MXM_REG_AUX4 = 0x5Du , MXM_REG_AUX5 = 0x5Eu , MXM_REG_POLARITYCTRL = 0x5Fu ,
  MXM_REG_AUXREFCTRL = 0x60u , MXM_REG_AUXTIME = 0x61u , MXM_REG_ACQCFG = 0x62u , MXM_REG_BALSWDLY = 0x63u ,
  MXM_REG_MEASUREEN1 = 0x64u , MXM_REG_MEASUREEN2 = 0x65u , MXM_REG_SCANCTRL = 0x66u , MXM_REG_ADCTEST1A = 0x67u ,
  MXM_REG_ADCTEST1B = 0x68u , MXM_REG_ADCTEST2A = 0x69u , MXM_REG_ADCTEST2B = 0x6Au , MXM_REG_DIAGCFG = 0x6Bu ,
  MXM_REG_CTSTCFG = 0x6Cu , MXM_REG_AUXSTCFG = 0x6Du , MXM_REG_DIAGGENCFG = 0x6Eu , MXM_REG_BALSWCTRL = 0x6Fu ,
  MXM_REG_BALEXP1 = 0x70u , MXM_REG_BALEXP2 = 0x71u , MXM_REG_BALEXP3 = 0x72u , MXM_REG_BALEXP4 = 0x73u ,
  MXM_REG_BALEXP5 = 0x74u , MXM_REG_BALEXP6 = 0x75u , MXM_REG_BALEXP7 = 0x76u , MXM_REG_BALEXP8 = 0x77u ,
  MXM_REG_BALEXP9 = 0x78u , MXM_REG_BALEXP10 = 0x79u , MXM_REG_BALEXP11 = 0x7Au , MXM_REG_BALEXP12 = 0x7Bu ,
  MXM_REG_BALEXP13 = 0x7Cu , MXM_REG_BALEXP14 = 0x7Du , MXM_REG_BALAUTOUVTHR = 0x7Eu , MXM_REG_BALDLYCTRL = 0x7Fu ,
  MXM_REG_BALCTRL = 0x80u , MXM_REG_BALSTAT = 0x81u , MXM_REG_BALUVSTAT = 0x82u , MXM_REG_BALDATA = 0x83u ,
  MXM_REG_I2CPNTR = 0x84u , MXM_REG_I2CWDATA1 = 0x85u , MXM_REG_I2CWDATA2 = 0x86u , MXM_REG_I2CRDATA1 = 0x87u ,
  MXM_REG_I2CRDATA2 = 0x88u , MXM_REG_I2CCFG = 0x89u , MXM_REG_I2CSTAT = 0x8Au , MXM_REG_I2CSEND = 0x8Bu ,
  MXM_REG_ID1 = 0x8Cu , MXM_REG_ID2 = 0x8Du , MXM_REG_OTP2 = 0x8Eu , MXM_REG_OTP3 = 0x8Fu ,
  MXM_REG_OTP4 = 0x90u , MXM_REG_OTP5 = 0x91u , MXM_REG_OTP6 = 0x92u , MXM_REG_OTP7 = 0x93u ,
  MXM_REG_OTP8 = 0x94u , MXM_REG_OTP9 = 0x95u , MXM_REG_OTP10 = 0x96u , MXM_REG_OTP11 = 0x97u ,
  MXM_REG_OTP12 = 0x98u
}
 MAX1785x register names. More...
 

Detailed Description

Register map of the MAX1785x monitoring IC.

SPDX-License-Identifier: BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:

  • ″This product uses parts of foxBMS®″
  • ″This product includes parts of foxBMS®″
  • ″This product is derived from foxBMS®″
Author
foxBMS Team
Date
2019-03-05 (date of creation)
Updated
2022-10-27 (date of last update)
Version
v1.4.1
Prefix
MXM

Register map with named registers of the monitoring ICs MAX17852 and MAX17853 by Maxim Integrated

Definition in file mxm_register_map.h.

Macro Definition Documentation

◆ MXM_REG_BIT_DEFN

#define MXM_REG_BIT_DEFN (   start,
  end 
)    ((MXM_REG_BM)(((MXM_REG_BM)1u << ((end) - (start) + 1u)) - 1u) << (start))

Define enumeration values for bitmasks.

Generates a bitmask from start to end. Examples:

Definition at line 703 of file mxm_register_map.h.

Typedef Documentation

◆ MXM_REG_BM

typedef uint16_t MXM_REG_BM

Type for register access for monitoring ICs.

Definition at line 693 of file mxm_register_map.h.

Enumeration Type Documentation

◆ MXM_REG_NAME_e

MAX1785x register names.

Register names and addresses of the monitoring ICs MAX17852 and MAX17853. Please note that the MAX17853 only supports a subset of these register values.

Enumerator
MXM_REG_VERSION 

VERSION is a read only accessible register which returns information on the device

MXM_REG_ADDRESS 

ADDRESS is a read and write accessible register which sets the first, last, and device address used by a device in a UART chain (UARTSEL=1). This register has no effect on a device operating in SPI mode (UARTSEL=0).

MXM_REG_STATUS1 

STATUS1 is a read and write accessible register which relates the current status of the device. STATUS1 also contains summary information on STATUS2, STATUS3, and FMEA registers, and other selected registers indicating if additional read back checks are required.

MXM_REG_STATUS2 

STATUS2 is a read and write accessible register which contains summary information on alerts related to interface and communication faults.

MXM_REG_STATUS3 

STATUS3 is a read and write accessible register which contains summary information on alerts related to automated cell balancing operations.

MXM_REG_FMEA1 

FMEA1 is a read and write accessible register which relates current information on possible fault conditions.

MXM_REG_FMEA2 

FMEA2 is a read and write accessible register which relates current information on possible fault conditions.

MXM_REG_ALRTSUM 

ALRTSUM is a read accessible register which relates added, detailed information on the current states of the device, breaking out several summary bits in STATUS1.

MXM_REG_ALRTOVCELL 

ALRTOVCELL is a read accessible register which relates current information on cell over voltage fault alerts based on ADC measurements.

MXM_REG_ALRTUVCELL 

ALRTUVCELL is a read accessible register which relates current information on cell under voltage fault alerts based on ADC measurements.

MXM_REG_MINMAXCELL 

MINMAX is a read accessible register which relates the cell locations with the highest and lowest values measured.

MXM_REG_ALRTAUXPRTCT 

ALRTAUXPRTCT is a read accessible register which relates current information on auxiliary input protection fault alerts.

MXM_REG_ALRTAUXOV 

ALRTAUXOV is a read accessible register which relates current information on auxiliary over voltage (cold) fault alerts.

MXM_REG_ALRTAUXUV 

ALRTAUXUV is a read accessible register which relates current information on auxiliary under voltage fault (hot) alerts.

MXM_REG_ALRTCOMPOV 

ALRTCOMPOV is a read accessible register which relates current information on cell over voltage fault alerts based on the redundant comparator.

MXM_REG_ALRTCOMPUV 

ALRTCOMPUV is a read accessible register which relates current information on cell under voltage fault alerts based on the redundant comparator.

MXM_REG_ALRTCOMPAUXOV 

ALRTCOMPAUXOV is a read accessible register which relates current information on auxiliary over voltage fault (cold) alerts based on the redundant comparator.

MXM_REG_ALRTCOMPAUXUV 

ALRTCOMPAUXUV is a read accessible register which relates current information on auxiliary under voltage fault (hot) alerts based on the redundant comparator.

MXM_REG_ALRTBALSW 

ALRTBALSW is a read accessible register which relates current summary information on balancing switch fault alerts.

MXM_REG_SWACTION 

SWACTION is a read and write accessible register which contains bits allowing software exit and reset requests. These requests are not recommended for general use, but may be of use in case of error.

MXM_REG_DEVCFG1 

DEVCFG1 is a read and write accessible register which governs the configuration of the device interface operation.

MXM_REG_DEVCFG2 

DEVCFG2 is a read and write accessible register which governs the configuration of the device filtering, several top level diagnostic modes, and timeout monitors.

MXM_REG_AUXGPIOCFG 

AUXGPIOCFG is a read and write accessible register which governs the configuration of the AUX/GPIO multifunction pins.

MXM_REG_GPIOCFG 

GPIOCFG is a read and write accessible register which governs the output state of GPIO outputs and reads back the input state of GPIO inputs.

MXM_REG_PACKCFG 

PACKCFG is a read and write accessible register which configures the part such that the top most cell and block used in the application is known. Details of Flex Pack applications are also configured within this register.

MXM_REG_ALRTIRQEN 

ALRTIRQEN is a read and write accessible register which selects which STATS1 alerts trigger interrupts via the ALERT interface port(s), and are included in the DCByte and Alert Packet (UART) or ALERT bit (SPI) notifications. Note the information in the STATUS1 register itself (or any component terms rolled up into STATUS1) is not masked/disabled by these settings, allowing the underlying data to always be available via STATUS1 readback.

MXM_REG_ALRTOVEN 

ALRTOVEN is a read and write accessible register which enables over voltage fault checks on selected input channels during scans using either the ADC or Comparator.

MXM_REG_ALRTUVEN 

ALRTUVEN is a read and write accessible register which enables under voltage fault checks on selected input channels during scans using either the ADC or Comparator.

MXM_REG_ALRTAUXOVEN 

ALRTAUXOVEN is a read and write accessible register which enables auxiliary over voltage (cold) fault checks on selected Auxiliary channels during scans using either the ADC or Comparator.

MXM_REG_ALRTAUXUVEN 

ALRTAUXUVEN is a read and write accessible register which enables auxiliary under voltage (hot) fault checks on selected Auxiliary channels using either the ADC or Comparator.

MXM_REG_ALRTCALTST 

ALRTCALTST is a read and write accessible register which allows the user to force Calibration alerts to test readback and interrupt logic. The forced alert(s) will remain forced until this register is written back to zeros (assuming the existing calibration data is within range)

MXM_REG_OVTHCLR 

OVTHCLR is a read and write accessible register which selects the cell over voltage alert clear threshold used with unipolar ADC measurements.

MXM_REG_OVTHSET 

OVTHSET is a read and write accessible register which selects the cell over voltage alert set threshold used with unipolar ADC measurements.

MXM_REG_UVTHCLR 

UVTHCLR is a read and write accessible register which selects the cell under voltage alert clear threshold used with unipolar ADC measurements.

MXM_REG_UVTHSET 

UVTHSET is a read and write accessible register which selects the cell under voltage alert set threshold used with unipolar ADC measurements.

MXM_REG_MSMTCH 

MSMTCH is a read and write accessible register which selects the cell voltage mismatch alert threshold used with ADC cell scan measurements.

MXM_REG_BIPOVTHCLR 

BIPOVTHCLR is a read and write accessible register which selects the cell over voltage alert clear threshold used with bipolar ADC measurements.

MXM_REG_BIPOVTHSET 

BIPOVTHSET is a read and write accessible register which selects the cell over voltage alert set threshold used with bipolar ADC measurements.

MXM_REG_BIPUVTHCLR 

BIPUVTHCLR is a read and write accessible register which selects the cell under voltage alert clear threshold used with bipolar ADC measurements.

MXM_REG_BIPUVTHSET 

BIPUVTHSET is a read and write accessible register which selects the cell under voltage alert set threshold used with bipolar ADC measurements.

MXM_REG_BLKOVTHCLR 

BLKOVTHCLR is a read and write accessible register which selects the block over voltage alert clear threshold used with ADC measurements.

MXM_REG_BLKOVTHSET 

BLKOVTHSET is a read and write accessible register which selects the block over voltage alert set threshold used with ADC measurements.

MXM_REG_BLKUVTHCLR 

BLKUVTHCLR is a read and write accessible register which selects the block under voltage alert clear threshold used with ADC measurements.

MXM_REG_BLKUVTHSET 

BLKUVTHSET is a read and write accessible register which selects the block under voltage alert set threshold used with ADC measurements.

MXM_REG_CSAOVTHCLR 

MAX17852 only: CSAOVTHCLR is a read and write accessible register which selects the CSA over voltage alert clear threshold used with ADC measurements.

MXM_REG_CSAOVTHSET 

MAX17852 only: CSAOVTHSET is a read and write accessible register which selects the CSA over voltage alert set threshold used with ADC measurements.

MXM_REG_CSAUVTHCLR 

MAX17852 only: CSAUVTHCLR is a read and write accessible register which selects the CSA under voltage alert clear threshold used with ADC measurements.

MXM_REG_CSAUVTHSET 

MAX17852 only: CSAUVTHSET is a read and write accessible register which selects the CSA under voltage alert set threshold used with ADC measurements.

MXM_REG_AUXROVTHCLR 

AUXROVTHCLR is a read and write accessible register which selects the over voltage (cold) alert clear threshold used with Ratiometric Auxiliary ADC measurements.

MXM_REG_AUXROVTHSET 

AUXROVTHSET is a read and write accessible register which selects the over voltage (cold) alert set threshold used with Ratiometric Auxiliary ADC measurements.

MXM_REG_AUXRUVTHCLR 

AUXRUVTHCLR is a read and write accessible register which selects the under voltage (hot) alert clear threshold used with Ratiometric Auxiliary ADC measurements.

MXM_REG_AUXRUVTHSET 

AUXRUVTHSET is a read and write accessible register which selects the under voltage (hot) alert set threshold used with Ratiometric Auxiliary ADC measurements.

MXM_REG_AUXOVTHCLR 

AUXOVTHCLR is a read and write accessible register which selects the over voltage alert clear threshold used with Absolute Auxiliary ADC measurements.

MXM_REG_AUXAOVTHSET 

AUXAOVTHSET is a read and write accessible register which selects the over voltage alert set threshold used with Absolute Auxiliary ADC measurements.

MXM_REG_AUXAUVTHCLR 

AUXAUVTHCLR is a read and write accessible register which selects the under voltage alert clear threshold used with Absolute Auxiliary ADC measurements.

MXM_REG_AUXAUVTHSET 

AUXAUVTHSET is a read and write accessible register which selects the under voltage alert set threshold used with Absolute Auxiliary ADC measurements.

MXM_REG_COMPOVTH 

COMPOVTH is a read and write accessible register which selects the cell over voltage alert threshold for the redundant comparator.

MXM_REG_COMPUVTH 

COMPUVTH is a read and write accessible register which selects the cell under voltage alert threshold for the redundant comparator.

MXM_REG_COMPAUXROVTH 

COMPAUXROVTH is a read and write accessible register which selects the over voltage (cold) alert threshold applied during Ratiometric Auxiliary comparator measurements.

MXM_REG_COMPAUXRUVTH 

COMPAUXRUVTH is a read and write accessible register which selects the under voltage (hot) alert threshold applied during Ratiometric Auxiliary comparator measurements.

MXM_REG_COMPAUXAOVTH 

COMPAUXAOVTH is a read and write accessible register which selects the over voltage alert threshold applied during Absolute Auxiliary comparator measurements.

MXM_REG_COMPAUXAUVTH 

COMPAUXAUVTH is a read and write accessible register which selects the under voltage alert threshold applied during Absolute Auxiliary comparator measurements.

MXM_REG_COMPOPNTH 

COMPOPNTH is a read and write accessible register which selects the under voltage alert threshold applied to Unipolar Cell inputs in Open Diagnostic Mode.

MXM_REG_COMPAUXROPNTH 

COMPAUXROPNTH is a read and write accessible register which selects the under voltage alert threshold applied to Ratiometric Auxiliary inputs in Open Diagnostic Mode.

MXM_REG_COMPAUXAOPNTH 

COMPAUXAOPNTH is a read and write accessible register which selects the under voltage alert threshold applied to Absolute Auxiliary inputs in Open Diagnostic Mode.

MXM_REG_COMPACCOVTH 

COMPACCOVTH is a read and write accessible register which selects the over voltage alert threshold applied during comparator accuracy diagnostics.

MXM_REG_COMPACCUVTH 

COMPACCUVTH is a read and write accessible register which selects the under voltage alert threshold applied during comparator accuracy diagnostics.

MXM_REG_BALSHRTTHR 

BALSHRTTHR is a read and write accessible register which selects alert threshold used during the Balance Switch Short Diagnostic mode.

MXM_REG_BALLOWTHR 

BALLOWTHR is a read and write accessible register which selects alert low threshold used during the Balance Switch Open Diagnostic Mode.

MXM_REG_BALHIGHTHR 

BALHIGHTHR is a read and write accessible register which selects alert High threshold used during the Balance Switch Open Diagnostic mode.

MXM_REG_CSA 

MAX17852 only: CSA is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_CELL1 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL2 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL3 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL4 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL5 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL6 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL7 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL8 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL9 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL10 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL11 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL12 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL13 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_CELL14 

CELLn is a read accessible register which holds the current value for each individual cell measurement result.

MXM_REG_BLOCK 

BLOCK is a read accessible register which holds the current value for the total block measurement result.

MXM_REG_TOTAL 

TOTAL is a read accessible register which holds the current value for the sum of all enabled measurement results within the stack.

MXM_REG_DIAG1 

DIAG1 is a read-only register which contains the Diagnostic result requested by the DIAGCFG:DIAGSEL1 selection taken during the last ADC acquisition.

MXM_REG_DIAG2 

DIAG2 is a read-only register which contains the Diagnostic result requested by the DIAGCFG:DIAGSEL2 selection taken during the last ADC acquisition.

MXM_REG_AUX0 

AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_AUX1 

AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_AUX2 

AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_AUX3 

AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_AUX4 

MAX17853 only: AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_AUX5 

MAX17853 only: AUXn is a read accessible register which holds the current value for each enabled individual auxiliary measurement result.

MXM_REG_POLARITYCTRL 

POLARITYCTRL is a read and write accessible register which governs the measurement type used during scans. In general, Unipolar mode indicates a Cell and Bipolar mode indicates a Bus-Bar.

MXM_REG_AUXREFCTRL 

AUXREFCTRL is a read and write accessible register which governs the reference range used for enabled Auxiliary channels during ADC and COMP acquisition sequences.

MXM_REG_AUXTIME 

AUXTIME is a read and write accessible register which governs the setting time allowed for biasing AUX/GPIO pins prior to measurements.

MXM_REG_ACQCFG 

ACQCFG is a read and write accessible register which governs several aspects of the measurement and acquisition procedure.

MXM_REG_BALSWDLY 

BALSWDLY is a read and write accessible register which selects the delay intervals used within Manual and Automated Cell Balancing operations when ADC measurements are requested.

MXM_REG_MEASUREEN1 

MEASUREEN1 is a read and write accessible register which governs the channels measured during ADC and COMP acquisition sequences.

MXM_REG_MEASUREEN2 

MEASUREEN2 is a read and write accessible register which governs the auxiliary channels measured during ADC and COMP acquisition sequences, as well as IIR initialization.

MXM_REG_SCANCTRL 

SCANCTRL is a read and write accessible register which governs the internal measurement acquisitions (scan) requested of the device. The register also manages the handling of data generated as a result of any scan request.

ADC Scans are used for precision measurements of cell and auxiliary voltages.

COMP Scans are used for periodic safety/redundancy checking of ADC results, and in some cases, enhanced communication efficiency.

On Demand Calibration will run an internal calibration of the ADC and update the Calibration Data Registers. All ADC measurements requested by Scan and Diagnostic Configuration and Control settings will be ignored.

Balance Switch and Cell Sense Wire Open ADC Diagnostic Scans are a special class of ADC Scan. Use of these settings temporarily overrides other Scan and Diagnostic Configuration and Control settings. See BALSW and Cell Sense Wire Diagnostics for details.

MXM_REG_ADCTEST1A 

ADCTEST1A is a read and write accessible register which contains user specified arguments used in ALU Diagnostics.

MXM_REG_ADCTEST1B 

ADCTEST1B is a read and write accessible register which contains user specified arguments used in ALU Diagnostics.

MXM_REG_ADCTEST2A 

ADCTEST2A is a read and write accessible register which contains user specified arguments used in ALU Diagnostics.

MXM_REG_ADCTEST2B 

ADCTEST2B is a read and write accessible register which contains user specified arguments used in ALU Diagnostics.

MXM_REG_DIAGCFG 

DIAGCFG is a read and write accessible register which governs diagnostic source and mode options applied to the internal measurement acquisitions (scans).

MXM_REG_CTSTCFG 

CTSTCFG is a read and write accessible register which controls the application of diagnostic current sources to selected cell input channels.

MXM_REG_AUXSTCFG 

AUXSTCFG is a read and write accessible register which controls the application of diagnostic modes and current source to selected Auxiliary and/or CSA input channels.

MXM_REG_DIAGGENCFG 

DIAGGENCFG is a read and write accessible register which controls the application of general diagnostic modes to the selected Auxiliary and/or CSA input paths.

MXM_REG_BALSWCTRL 

BALSWCTRL is a read and write accessible register which governs the behavior of the Charge Balancing Switches in Manual and Auto Cell Balancing modes.

Write access to this register is blocked during Automated Cell Balancing operations (CBMODE=001, 1xx).

MXM_REG_BALEXP1 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1).

BALEXP1 sets the Expiration Time for all Group Auto Cell Balancing and Discharge modes and the Watchdog time out for Manual Cell Balancing mode.

Write access to this register is blocked during all Cell Balancing operations (CBMODE!=000).

MXM_REG_BALEXP2 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP3 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP4 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP5 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP6 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP7 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP8 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP9 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP10 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP11 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP12 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP13 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALEXP14 

BALEXPn is a read and write accessible register which holds the Cell Balancing Expiration Time for CELLn (using the switch across SWn and SWn-1). Used in Individual Auto Cell Balancing modes only.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx).

MXM_REG_BALAUTOUVTHR 

BALAUTOUVTHR is a read and write accessible register which selects the cell under voltage exit threshold for the ADC when used in Automated Cell Balancing operations.

A write to this register allows direct setting or automatic selection of this threshold.

Write access to this register is blocked during Automatic Cell Balancing operations (CBMODE=1xx). Also, during active measurement scans, all writes with CBUVMINCELL=1 will be blocked and will result in ALRTRJCT being issued (since the MINCELL data may be altered as a result of the scan in progress).

A read from this register will display the current value of the threshold and the method used for its selection.

MXM_REG_BALDLYCTRL 

BALDLYCTRL is a read and write accessible register which selects the delay/timing intervals used within Automated Cell Balancing operations.

Write access to this register is blocked during Automated Cell Balancing operations (CBMODE=001, 1xx).

MXM_REG_BALCTRL 

BALCTRL is a read and write accessible register which initiates and controls all internal Cell Balancing modes and operations.

Any write to this register to a mode other than CBMODE=000 (Disable) will restart the CBTIMER at zero and launch the requested mode of operation.

MXM_REG_BALSTAT 

BALSTAT is a read accessible register which allows the monitoring of any Automated Cell Balancing operations currently in progress.

Once a CBMODE is initiated, all status bits persist and are cleared only when CBMODE is written to 000 (Disabled) or when a new CBMODE operation is initiated via CBSTART.

MXM_REG_BALUVSTAT 

BALUVSTAT is a read accessible register which relates current summary information on the Cell voltages vs. the CBUVTHR undervoltage threshold.

MXM_REG_BALDATA 

BALDATA is a read accessible register which relates current summary information on the Cell voltage vs. the CBUVTHR undervoltage threshold.

MXM_REG_I2CPNTR 

MAX17852 only: I2CPNTR is a read and write accessible register which contains two Pointer bytes (Register Addresses) available for I2C Master transactions.

Once I2CSEND initiates a read or write transaction, attempts to write I2CPNTR during the transaction will be ignored and will case an I2CRJCT fault to be issued.

MXM_REG_I2CWDATA1 

MAX17852 only: I2CWDATA1 is a read and write accessible register which contains the upper data bytes available for I2C Master Write Mode transactions.

Once I2CSEND initiates an I2C read or write transaction, attempts to write I2CWDATA1 during the transaction will be ignored and will cause an I2CRJCT fault to be issued.

MXM_REG_I2CWDATA2 

MAX17852 only: I2CWDATA2 is a read and write accessible register which contains the lower data bytes available for I2C Master Write Mode transactions.

Once I2CSEND initiates an I2C read or write transaction, attempts to write I2CWDATA2 during the transaction will be ignored and will cause an I2CRJCT fault to be issued.

MXM_REG_I2CRDATA1 

MAX17852 only: I2CRDATA1 is a read accessible register which contains the upper data bytes received for I2C Master Read Mode transactions.

Note during I2C read transactions, data is updated as each byte is received/acknowledged, so reading back this register during active I2C read transactions will cause an I2CRJCT fault to be issued.

MXM_REG_I2CRDATA2 

MAX17852 only: I2CRDATA2 is a read accessible register which contains the lower data bytes received for I2C Master Read Mode transactions.

Note during I2C read transactions, data is updated as each byte is received/acknowledged, so reading back this register during active I2C read transactions will cause an I2CRJCT fault to be issued.

MXM_REG_I2CCFG 

MAX17852 only: I2CCFG is a read and write accessible register which configures I2C Master modes and transaction formats.

Once I2CSEND initiates a read or write transaction, attempts to write I2CCFG during the transaction will be ignored and will cause and I2CRJCT fault to be issued.

MXM_REG_I2CSTAT 

MAX17852 only: I2CSTAT is a read and write accessible register which shows the current status of the I2C Master.

The I2CSTATUS bits are updated in real time, indicating the current state of the I2C Master and any requested transaction. This status can be cleared by write operations and modified by transaction progress or subsequent transaction requests.

The second byte contains I2C Fault bits, indicating a fault was observed during an I2C transaction. These bits are updated as they occur and are only cleared by writing to zero. Several faults may occur during a corrupted transaction, so it is best to wait until I2CSTATUS reads 10 (Transaction Error) to ensure all errors have been reported.

While not advisable, if further I2C transactions are requested before the I2C Fault bits from previous transactions are read back and cleared, a cumulative history of faults will be listed, even if subsequent transactions are successful.

MXM_REG_I2CSEND 

MAX17852 only: I2CSEND is a read and write accessible register which configures and initiates an I2C Master transaction.

A write to this register will initiate an I2C Master transaction. Only one transaction is supported at any given time. If a write to I2CSEND occurs during an active I2C transaction already in progress, the latest transaction request will be ignored and the I2CSEND contents will not be updated. If this occurs, an I2CRJCT fault will be issued.

A read from this register will readback the current contents. This will represent the last transaction request accepted by the I2C Master.

MXM_REG_ID1 

ID1 is a read accessible register which contains the 2 LSBytes of the unique Device ID stored in ROM and subject to ROMCRC validation.

MXM_REG_ID2 

ID2 is a read accessible register which contains the 2 MSBytes of the unique Device ID stored in ROM and subject to ROMCRC validation.

MXM_REG_OTP2 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP3 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP4 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP5 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP6 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP7 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP8 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP9 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP10 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP11 

Factory Calibration Data ROM and subject to ROMCRC validation.

MXM_REG_OTP12 

Factory Calibration Data ROM and subject to ROMCRC validation.

Definition at line 71 of file mxm_register_map.h.