sys_mon_cfg.h

Go to the documentation of this file.

/**
 *
 * @copyright © 2010 - 2022, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V.
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * We kindly request you to use one or more of the following phrases to refer to
 * foxBMS in your hardware, software, documentation or advertising materials:
 *
 * - ″This product uses parts of foxBMS®″
 * - ″This product includes parts of foxBMS®″
 * - ″This product is derived from foxBMS®″
 *
 */
 
/**
 * @file    sys_mon_cfg.h
 * @author  foxBMS Team
 * @date    2019-11-28 (date of creation)
 * @updated 2022-10-27 (date of last update)
 * @version v1.4.1
 * @ingroup ENGINE_CONFIGURATION
 * @prefix  SYSM
 *
 * @brief   configuration of the system monitoring module
 */
 
#ifndef FOXBMS__SYS_MON_CFG_H_
#define FOXBMS__SYS_MON_CFG_H_
 
/*========== Includes =======================================================*/
#include "general.h"
 
#include "diag_cfg.h"
 
/*========== Macros and Definitions =========================================*/
/** diagnosis handling type for system monitoring */
typedef enum {
    SYSM_HANDLING_DO_NOTHING,          /*!< take no action */
    SYSM_HANDLING_SWITCH_OFF_CONTACTOR /*!< open contactors */
} SYSM_HANDLING_TYPE_e;
 
/**
 * listing of system-relevant tasks or functions which are checked by
 * the system monitoring
 */
typedef enum {
    SYSM_TASK_ID_ENGINE,                 /**< diag entry for engine task                 */
    SYSM_TASK_ID_CYCLIC_1ms,             /**< diag entry for engine cyclic 1ms task      */
    SYSM_TASK_ID_CYCLIC_10ms,            /**< diag entry for engine cyclic 10ms task     */
    SYSM_TASK_ID_CYCLIC_100ms,           /**< diag entry for engine cyclic 100ms task    */
    SYSM_TASK_ID_CYCLIC_ALGORITHM_100ms, /**< diag entry for algorithm cyclic 100ms task */
    SYSM_TASK_ID_MAX                     /**< end marker do not delete               */
} SYSM_TASK_ID_e;
 
/** recording activation */
typedef enum {
    SYSM_RECORDING_ENABLED,  /*!< enable event recording  */
    SYSM_RECORDING_DISABLED, /*!< disable event recording */
} SYSM_RECORDING_e;
 
/** enable diagnosis entry for system monitoring */
typedef enum {
    SYSM_ENABLED,  /*!< entry enabled */
    SYSM_DISABLED, /*!< entry disabled */
} SYSM_ACTIVATE_e;
 
/** Channel configuration of one system monitoring channel */
typedef struct {
    SYSM_TASK_ID_e id;                               /*!< the task id by its symbolic name */
    SYSM_ACTIVATE_e enable;                          /*!< enable or disable system monitoring */
    uint8_t cycleTime;                               /*!< max. delay time in ms until #SYSM_Notify has to be called */
    uint8_t maxJitter;                               /*!< max. jitter in ms */
    SYSM_RECORDING_e enableRecording;                /*!< enabled if set to DIAG_RECORDING_ENABLED */
    SYSM_HANDLING_TYPE_e handlingType;               /*!< type of handling of system monitoring errors */
    void (*callbackFunction)(SYSM_TASK_ID_e taskId); /*!< callback in case of error */
} SYSM_MONITORING_CFG_s;
 
/*========== Extern Constant and Variable Declarations ======================*/
/** diag system monitoring struct */
extern SYSM_MONITORING_CFG_s sysm_ch_cfg[];
 
/*========== Extern Function Prototypes =====================================*/
 
/*========== Externalized Static Function Implementations (Unit Test) =======*/
#ifdef UNITY_UNIT_TEST
extern void TEST_SYSM_DummyCallback(SYSM_TASK_ID_e taskId);
#endif
 
/*========== Externalized Static Functions Prototypes (Unit Test) ===========*/
 
#endif /* FOXBMS__SYS_MON_CFG_H_ */