Tests for the CAN driver callbacks. More...

#include "unity.h"
#include "Mockbms.h"
#include "Mockcan.h"
#include "Mockdatabase.h"
#include "Mockdiag.h"
#include "Mockfoxmath.h"
#include "Mockimd.h"
#include "Mockmpu_prototypes.h"
#include "Mockos.h"
#include "database_cfg.h"
#include "can_cbs_tx.h"
#include "can_cfg_tx-message-definitions.h"
#include "can_helper.h"

Include dependency graph for test_can_cbs_tx_minimum-maximum-values.c:

Go to the source code of this file.

Functions
void	setUp (void)

void	tearDown (void)

void	testCANTX_MinimumMaximumValuesAllStringsOpen (void)

void	testCANTX_MinimumMaximumValuesAllStringsClosed (void)

Variables
static DATA_BLOCK_CELL_VOLTAGE_s	can_tableCellVoltages = {.header.uniqueId = DATA_BLOCK_ID_CELL_VOLTAGE}

static DATA_BLOCK_CELL_TEMPERATURE_s	can_tableTemperatures = {.header.uniqueId = DATA_BLOCK_ID_CELL_TEMPERATURE}

static DATA_BLOCK_MIN_MAX_s	can_tableMinimumMaximumValues = {.header.uniqueId = DATA_BLOCK_ID_MIN_MAX}

static DATA_BLOCK_CURRENT_SENSOR_s	can_tableCurrentSensor = {.header.uniqueId = DATA_BLOCK_ID_CURRENT_SENSOR}

static DATA_BLOCK_OPEN_WIRE_s	can_tableOpenWire = {.header.uniqueId = DATA_BLOCK_ID_OPEN_WIRE_BASE}

static DATA_BLOCK_STATEREQUEST_s	can_tableStateRequest = {.header.uniqueId = DATA_BLOCK_ID_STATEREQUEST}

static DATA_BLOCK_PACK_VALUES_s	can_tablePackValues = {.header.uniqueId = DATA_BLOCK_ID_PACK_VALUES}

static DATA_BLOCK_SOF_s	can_tableSof = {.header.uniqueId = DATA_BLOCK_ID_SOF}

static DATA_BLOCK_SOX_s	can_tableSox = {.header.uniqueId = DATA_BLOCK_ID_SOX}

static DATA_BLOCK_ERRORSTATE_s	can_tableErrorState = {.header.uniqueId = DATA_BLOCK_ID_ERRORSTATE}

static DATA_BLOCK_INSULATION_MONITORING_s	can_tableInsulation

static DATA_BLOCK_MSL_FLAG_s	can_tableMslFlags = {.header.uniqueId = DATA_BLOCK_ID_MSL_FLAG}

static DATA_BLOCK_RSL_FLAG_s	can_tableRslFlags = {.header.uniqueId = DATA_BLOCK_ID_RSL_FLAG}

static DATA_BLOCK_MOL_FLAG_s	can_tableMolFlags = {.header.uniqueId = DATA_BLOCK_ID_MOL_FLAG}

QueueHandle_t	imd_canDataQueue = NULL_PTR

const CAN_SHIM_s	can_kShim

static uint8_t	muxId = 0u

Detailed Description

Tests for the CAN driver callbacks.

Copyright: © 2010 - 2022, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V. All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:

″This product uses parts of foxBMS®″
″This product includes parts of foxBMS®″
″This product is derived from foxBMS®″

Author: foxBMS Team

Date: 2021-04-22 (date of creation)

Updated: 2022-10-27 (date of last update)

Version: v1.4.1

Prefix: TEST

Definition in file test_can_cbs_tx_minimum-maximum-values.c.

Function Documentation

◆ setUp()

void setUp ( void )

Definition at line 115 of file test_can_cbs_tx_minimum-maximum-values.c.

◆ tearDown()

void tearDown ( void )

Definition at line 118 of file test_can_cbs_tx_minimum-maximum-values.c.

◆ testCANTX_MinimumMaximumValuesAllStringsClosed()

void testCANTX_MinimumMaximumValuesAllStringsClosed ( void )

Values of: minimum cell voltage: 2000mV maximum cell voltage: 3000mV minimum temperature: -15degC maximum temperature: 35degC

Definition at line 157 of file test_can_cbs_tx_minimum-maximum-values.c.

Here is the call graph for this function:

◆ testCANTX_MinimumMaximumValuesAllStringsOpen()

void testCANTX_MinimumMaximumValuesAllStringsOpen ( void )

Values of: minimum cell voltage: 2000mV maximum cell voltage: 3000mV minimum temperature: -15degC maximum temperature: 35degC

Definition at line 122 of file test_can_cbs_tx_minimum-maximum-values.c.

Here is the call graph for this function:

Variable Documentation

◆ can_kShim

const CAN_SHIM_s can_kShim

Initial value:

= {
    .pQueueImd             = &imd_canDataQueue,
    .pTableCellVoltage     = &can_tableCellVoltages,
    .pTableCellTemperature = &can_tableTemperatures,
    .pTableMinMax          = &can_tableMinimumMaximumValues,
    .pTableCurrentSensor   = &can_tableCurrentSensor,
    .pTableOpenWire        = &can_tableOpenWire,
    .pTableStateRequest    = &can_tableStateRequest,
    .pTablePackValues      = &can_tablePackValues,
    .pTableSof             = &can_tableSof,
    .pTableSox             = &can_tableSox,
    .pTableErrorState      = &can_tableErrorState,
    .pTableInsulation      = &can_tableInsulation,
    .pTableMsl             = &can_tableMslFlags,
    .pTableRsl             = &can_tableRslFlags,
    .pTableMol             = &can_tableMolFlags,
}