foxBMS - Unit Tests
1.5.0
The foxBMS Unit Tests API Documentation
|
FS8x driver interface. More...
Go to the source code of this file.
Macros | |
#define | FS8x_WD_SEED_DEFAULT 0x5AB2U |
Watchdog seed default value. More... | |
Enumerations | |
enum | fs8x_reg_output_t { fs8xBuck1 = 4 , fs8xBuck2 = 3 , fs8xBuck3 = 2 , fs8xLdo1 = 1 , fs8xLdo2 = 0 , fs8xVBoost = 5 , fs8xVPre = 6 } |
Voltage outputs. Can be used with function FS8x_SetRegulatorState(). More... | |
enum | fs8x_amux_selection_t { fs8xAmuxGnd = FS8X_M_AMUX_GND , fs8xAmuxVddio = FS8X_M_AMUX_VDDIO , fs8xAmuxTempSensor = FS8X_M_AMUX_TEMPERATURE_SENSOR , fs8xAmuxBandgapMain = FS8X_M_AMUX_BAND_GAP_MAIN , fs8xAmuxBandgapFailSafe = FS8X_M_AMUX_BAND_GAP_FAIL_SAFE , fs8xAmuxVbuck1Volt = FS8X_M_AMUX_VBUCK1_VOLTAGE , fs8xAmuxVbuck2Volt = FS8X_M_AMUX_VBUCK2_VOLTAGE , fs8xAmuxVbuck3VoltDiv2_5 = FS8X_M_AMUX_VBUCK3_VOLTAGE_DIVIDED , fs8xAmuxVpreVoltDiv2_5 = FS8X_M_AMUX_VPRE_VOLTAGE_DIVIDED , fs8xAmuxVboostVoltDiv2_5 = FS8X_M_AMUX_VBOOST_VOLTAGE_DIVIDED , fs8xAmuxVldo1VoltDiv2_5 = FS8X_M_AMUX_VLDO1_VOLTAGE_DIVIDED , fs8xAmuxVldo2VoltDiv2_5 = FS8X_M_AMUX_VLDO2_VOLTAGE_DIVIDED , fs8xAmuxVbosVoltDiv2_5 = FS8X_M_AMUX_VBOS_VOLTAGE_DIVIDED , fs8xAmuxVsup1VoltDiv7_5 = FS8X_M_AMUX_VSUP1_VOLTAGE_DIVIDED , fs8xAmuxWake1VoltDiv7_5 = FS8X_M_AMUX_WAKE1_VOLTAGE_DIVIDED , fs8xAmuxWake2VoltDiv7_5 = FS8X_M_AMUX_WAKE2_VOLTAGE_DIVIDED , fs8xAmuxVana = FS8X_M_AMUX_VANA , fs8xAmuxVdig = FS8X_M_AMUX_VDIG , fs8xAmuxVdigFs = FS8X_M_AMUX_VDIG_FS , fs8xAmuxPsync = FS8X_M_AMUX_PSYNC_VOLTAGE , fs8xAmuxVsup1VoltDiv14 = FS8X_M_RATIO_RATIO_14 | FS8X_M_AMUX_VSUP1_VOLTAGE_DIVIDED , fs8xAmuxWake1VoltDiv14 = FS8X_M_RATIO_RATIO_14 | FS8X_M_AMUX_WAKE1_VOLTAGE_DIVIDED , fs8xAmuxWake2VoltDiv14 = FS8X_M_RATIO_RATIO_14 | FS8X_M_AMUX_WAKE2_VOLTAGE_DIVIDED } |
Functions | |
fs8x_status_t | FS8x_WD_ChangeSeed (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData, uint16_t wdSeed) |
Changes seed of LFSR used for watchdog. More... | |
fs8x_status_t | FS8x_WD_Refresh (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData) |
Performs the watchdog refresh. More... | |
fs8x_status_t | FS8x_FS0B_Release (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData) |
FS0B release routine. More... | |
fs8x_status_t | FS8x_SwitchAMUXchannel (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData, fs8x_amux_selection_t channelSelection) |
Switches a desired channel to the AMUX pin. More... | |
fs8x_status_t | FS8x_SetRegulatorState (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData, fs8x_reg_output_t vreg, bool enable) |
Sets state (enable/disable) of the selected voltage regulator. More... | |
fs8x_status_t | FS8x_GetFaultErrorCounterValue (SPI_INTERFACE_CONFIG_s *spiInterface, fs8x_drv_data_t *drvData, uint8_t *faultErrorCounterValue) |
Reads actual Fault Error Counter value. More... | |
FS8x driver interface.
Definition in file sbc_fs8x.h.
#define FS8x_WD_SEED_DEFAULT 0x5AB2U |
Watchdog seed default value.
Definition at line 59 of file sbc_fs8x.h.