test_adi_ades1830_gpio_voltages.c File Reference

Test of some module. More...

#include "unity.h"
#include "Mockadi_ades183x_cfg.h"
#include "Mockos.h"
#include "Mockspi.h"
#include "adi_ades1830_defs.h"
#include "adi_ades183x_buffers.h"
#include "adi_ades183x_commands.h"
#include "adi_ades183x_commands_voltages.h"
#include "adi_ades183x_defs.h"
#include "adi_ades183x_gpio_voltages.h"
#include "adi_ades183x_helpers.h"
#include "adi_ades183x_pec.h"
#include "spi_cfg-helper.h"
#include "test_assert_helper.h"
#include <stdbool.h>
#include <stdint.h>

Include dependency graph for test_adi_ades1830_gpio_voltages.c:

Go to the source code of this file.

Macros
#define	TEST_ADI_AUXILIARY_RESULT_REGISTER_SET_INVALID_VALUE   ((ADI_AUXILIARY_RESULT_REGISTER_SET_E) + 1u)

Functions
void	setUp (void)
void	tearDown (void)
void	testADI_GetGpioVoltages (void)
void	testADI_SaveRxToGpioVoltageBuffer (void)

Variables
static DATA_BLOCK_ALL_GPIO_VOLTAGES_s	adi_allGpioVoltage = {.header.uniqueId = DATA_BLOCK_ID_ALL_GPIO_VOLTAGES_BASE}
static DATA_BLOCK_ALL_GPIO_VOLTAGES_s	adi_allGpioVoltageRedundant
static DATA_BLOCK_ALL_GPIO_VOLTAGES_s	adi_allGpioVoltageOpenWire
static ADI_ERROR_TABLE_s	adi_errorTable = {0}
static uint16_t	adi_bufferRxPecTest [ADI_N_BYTES_FOR_DATA_TRANSMISSION] = {0}
static uint16_t	adi_bufferTxPecTest [ADI_N_BYTES_FOR_DATA_TRANSMISSION] = {0}
ADI_STATE_s	adi_stateBase
const uint8_t	adi_voltageInputsUsed [ADI_MAX_SUPPORTED_CELLS]
static spiDAT1_t	spi_kAdiDataConfig [BS_NR_OF_STRINGS]
SPI_INTERFACE_CONFIG_s	spi_adiInterface [BS_NR_OF_STRINGS]

Detailed Description

Test of some module.

Copyright

© 2010 - 2023, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V. All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:

• ″This product uses parts of foxBMS®″
• ″This product includes parts of foxBMS®″
• ″This product is derived from foxBMS®″

Author

foxBMS Team

Date

2022-12-08 (date of creation)

Updated

2023-10-12 (date of last update)

Version

v1.6.0

Prefix

TEST

Definition in file test_adi_ades1830_gpio_voltages.c.

Macro Definition Documentation

TEST_ADI_AUXILIARY_RESULT_REGISTER_SET_INVALID_VALUE

#define TEST_ADI_AUXILIARY_RESULT_REGISTER_SET_INVALID_VALUE   ((ADI_AUXILIARY_RESULT_REGISTER_SET_E) + 1u)

Definition at line 161 of file test_adi_ades1830_gpio_voltages.c.

Function Documentation

setUp()

void setUp

(

void

)

Definition at line 164 of file test_adi_ades1830_gpio_voltages.c.

tearDown()

void tearDown

(

void

)

Definition at line 167 of file test_adi_ades1830_gpio_voltages.c.

testADI_GetGpioVoltages()

void testADI_GetGpioVoltages

(

void

)

Definition at line 171 of file test_adi_ades1830_gpio_voltages.c.

Here is the call graph for this function:

testADI_SaveRxToGpioVoltageBuffer()

void testADI_SaveRxToGpioVoltageBuffer

(

void

)

Definition at line 255 of file test_adi_ades1830_gpio_voltages.c.

Here is the call graph for this function:

Variable Documentation

adi_allGpioVoltage

DATA_BLOCK_ALL_GPIO_VOLTAGES_s adi_allGpioVoltage = {.header.uniqueId = DATA_BLOCK_ID_ALL_GPIO_VOLTAGES_BASE}

static

Definition at line 100 of file test_adi_ades1830_gpio_voltages.c.

adi_allGpioVoltageOpenWire

DATA_BLOCK_ALL_GPIO_VOLTAGES_s adi_allGpioVoltageOpenWire

static

Initial value:

= {
    .header.uniqueId = DATA_BLOCK_ID_ALL_GPIO_VOLTAGES_BASE}

Definition at line 103 of file test_adi_ades1830_gpio_voltages.c.

adi_allGpioVoltageRedundant

DATA_BLOCK_ALL_GPIO_VOLTAGES_s adi_allGpioVoltageRedundant

static

Initial value:

= {
    .header.uniqueId = DATA_BLOCK_ID_ALL_GPIO_VOLTAGES_BASE}

Definition at line 101 of file test_adi_ades1830_gpio_voltages.c.

adi_bufferRxPecTest

uint16_t adi_bufferRxPecTest[ADI_N_BYTES_FOR_DATA_TRANSMISSION] = {0}

static

Definition at line 106 of file test_adi_ades1830_gpio_voltages.c.

adi_bufferTxPecTest

uint16_t adi_bufferTxPecTest[ADI_N_BYTES_FOR_DATA_TRANSMISSION] = {0}

static

Definition at line 107 of file test_adi_ades1830_gpio_voltages.c.

adi_errorTable

ADI_ERROR_TABLE_s adi_errorTable = {0}

static

init in ADI_ResetErrorTable-function

Definition at line 105 of file test_adi_ades1830_gpio_voltages.c.

adi_stateBase

ADI_STATE_s adi_stateBase

Initial value:

= {
    .data.txBuffer                 = adi_bufferTxPecTest,
    .data.rxBuffer                 = adi_bufferRxPecTest,
    .data.allGpioVoltages          = &adi_allGpioVoltage,
    .data.allGpioVoltagesRedundant = &adi_allGpioVoltageRedundant,
    .data.allGpioVoltageOpenWire   = &adi_allGpioVoltageOpenWire,
    .data.errorTable               = &adi_errorTable,
}

Contains the internal state of the adi driver.

Definition at line 109 of file test_adi_ades1830_gpio_voltages.c.

adi_voltageInputsUsed

const uint8_t adi_voltageInputsUsed[ADI_MAX_SUPPORTED_CELLS]

Initial value:

= {
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
    1,
}

Lookup table to indicate which voltage inputs are used

Definition at line 119 of file test_adi_ades1830_gpio_voltages.c.

spi_adiInterface

SPI_INTERFACE_CONFIG_s spi_adiInterface[BS_NR_OF_STRINGS]

Initial value:

= {
    {
        .pConfig  = &spi_kAdiDataConfig[0u],
        .pNode    = spiREG1,
        .pGioPort = &(spiREG1->PC3),
        .csPin    = 2u,
        .csType   = SPI_CHIP_SELECT_HARDWARE,
    },
}

SPI interface configuration for ADI communication This is a list of structs because of multi string

Definition at line 151 of file test_adi_ades1830_gpio_voltages.c.

spi_kAdiDataConfig

spiDAT1_t spi_kAdiDataConfig[BS_NR_OF_STRINGS]

static

Initial value:

= {
    {                      
     .CS_HOLD = TRUE,      
     .WDEL    = FALSE,     
     .DFSEL   = SPI_FMT_0, 
     .CSNR    = SPI_HARDWARE_CHIP_SELECT_2_ACTIVE},
}

SPI data configuration struct for ADI communication

Definition at line 139 of file test_adi_ades1830_gpio_voltages.c.