can_cfg_tx-message-definitions.h File Reference

Header for the driver for the CAN module. More...

#include "can_cfg.h"
#include <stdint.h>

Include dependency graph for can_cfg_tx-message-definitions.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	CANTX_DEBUG_RESPONSE_ID   (0x227u) /* check_ids:not-periodic */
#define	CANTX_DEBUG_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_UNSUPPORTED_MULTIPLEXER_VAL_ID   (0x201u) /* check_ids:not-periodic */
#define	CANTX_UNSUPPORTED_MULTIPLEXER_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_FATAL_ERRORS_ID   (0x0FFu) /* check_ids:not-periodic */
#define	CANTX_FATAL_ERRORS_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_IMD_REQUEST_ID   (0x22u)
#define	CANTX_IMD_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_BMS_STATE_MESSAGE
#define	CANTX_BMS_STATE_DETAILS_MESSAGE
#define	CANTX_CELL_VOLTAGES_MESSAGE
#define	CANTX_MINIMUM_MAXIMUM_VALUES_MESSAGE
#define	CANTX_LIMIT_VALUES_MESSAGE
#define	CANTX_CELL_TEMPERATURES_MESSAGE
#define	CANTX_PACK_STATE_ESTIMATION_MESSAGE
#define	CANTX_PACK_VALUES_MESSAGE
#define	CANTX_STRING_STATE_MESSAGE
#define	CANTX_STRING_VALUES_P0_MESSAGE
#define	CANTX_STRING_VALUES_P1_MESSAGE
#define	CANTX_STRING_MIN_MAX_VALUES_MESSAGE
#define	CANTX_STRING_STATE_ESTIMATION_MESSAGE
#define	CANTX_BMS_STATE_ID   (0x220u)
#define	CANTX_BMS_STATE_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_BMS_STATE_PERIOD_ms   (100u)
#define	CANTX_BMS_STATE_PHASE_ms   (0u)
#define	CANTX_BMS_STATE_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_BMS_STATE_DETAILS_ID   (0x226u)
#define	CANTX_BMS_STATE_DETAILS_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_BMS_STATE_DETAILS_PERIOD_ms   (1000u)
#define	CANTX_BMS_STATE_DETAILS_PHASE_ms   (100u)
#define	CANTX_BMS_STATE_DETAILS_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_CELL_VOLTAGES_ID   (0x240u)
#define	CANTX_CELL_VOLTAGES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_CELL_VOLTAGES_PERIOD_ms   (100u)
#define	CANTX_CELL_VOLTAGES_PHASE_ms   (10u)
#define	CANTX_CELL_VOLTAGES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_CELL_TEMPERATURES_ID   (0x250u)
#define	CANTX_CELL_TEMPERATURES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_CELL_TEMPERATURES_PERIOD_ms   (200u)
#define	CANTX_CELL_TEMPERATURES_PHASE_ms   (20u)
#define	CANTX_CELL_TEMPERATURES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_LIMIT_VALUES_ID   (0x224u)
#define	CANTX_LIMIT_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_LIMIT_VALUES_PERIOD_ms   (100u)
#define	CANTX_LIMIT_VALUES_PHASE_ms   (30u)
#define	CANTX_LIMIT_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_MINIMUM_MAXIMUM_VALUES_ID   (0x223u)
#define	CANTX_MINIMUM_MAXIMUM_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_MINIMUM_MAXIMUM_VALUES_PERIOD_ms   (100u)
#define	CANTX_MINIMUM_MAXIMUM_VALUES_PHASE_ms   (40u)
#define	CANTX_MINIMUM_MAXIMUM_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_PACK_STATE_ESTIMATION_ID   (0x225u)
#define	CANTX_PACK_STATE_ESTIMATION_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_PACK_STATE_ESTIMATION_PERIOD_ms   (1000u)
#define	CANTX_PACK_STATE_ESTIMATION_PHASE_ms   (50u)
#define	CANTX_PACK_STATE_ESTIMATION_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_PACK_VALUES_ID   (0x222u)
#define	CANTX_PACK_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_PACK_VALUES_PERIOD_ms   (100u)
#define	CANTX_PACK_VALUES_PHASE_ms   (60u)
#define	CANTX_PACK_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_STRING_STATE_ID   (0x221u)
#define	CANTX_STRING_STATE_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_STRING_STATE_PERIOD_ms   (100u)
#define	CANTX_STRING_STATE_PHASE_ms   (70u)
#define	CANTX_STRING_STATE_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_STRING_VALUES_P0_ID   (0x280u)
#define	CANTX_STRING_VALUES_P0_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_STRING_VALUES_P0_PERIOD_ms   (100u)
#define	CANTX_STRING_VALUES_P0_PHASE_ms   (80u)
#define	CANTX_STRING_VALUES_P0_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_STRING_VALUES_P1_ID   (0x283u)
#define	CANTX_STRING_VALUES_P1_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_STRING_VALUES_P1_PERIOD_ms   (100u)
#define	CANTX_STRING_VALUES_P1_PHASE_ms   (10u)
#define	CANTX_STRING_VALUES_P1_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_STRING_MIN_MAX_VALUES_ID   (0x281u)
#define	CANTX_STRING_MIN_MAX_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_STRING_MIN_MAX_VALUES_PERIOD_ms   (100u)
#define	CANTX_STRING_MIN_MAX_VALUES_PHASE_ms   (90u)
#define	CANTX_STRING_MIN_MAX_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)
#define	CANTX_STRING_STATE_ESTIMATION_ID   (0x282u)
#define	CANTX_STRING_STATE_ESTIMATION_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)
#define	CANTX_STRING_STATE_ESTIMATION_PERIOD_ms   (1000u)
#define	CANTX_STRING_STATE_ESTIMATION_PHASE_ms   (0u)
#define	CANTX_STRING_STATE_ESTIMATION_ENDIANNESS   (CAN_BIG_ENDIAN)

Detailed Description

Header for the driver for the CAN module.

Copyright

© 2010 - 2023, Fraunhofer-Gesellschaft zur Foerderung der angewandten Forschung e.V. All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

We kindly request you to use one or more of the following phrases to refer to foxBMS in your hardware, software, documentation or advertising materials:

• ″This product uses parts of foxBMS®″
• ″This product includes parts of foxBMS®″
• ″This product is derived from foxBMS®″

Author

foxBMS Team

Date

2022-07-01 (date of creation)

Updated

2023-10-12 (date of last update)

Version

v1.6.0

Prefix

CANTX

Definition in file can_cfg_tx-message-definitions.h.

Macro Definition Documentation

CANTX_BMS_STATE_DETAILS_ENDIANNESS

#define CANTX_BMS_STATE_DETAILS_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for BMS detail state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 100 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_DETAILS_ID

#define CANTX_BMS_STATE_DETAILS_ID   (0x226u)

CAN message properties for BMS detail state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 96 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_DETAILS_ID_TYPE

#define CANTX_BMS_STATE_DETAILS_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for BMS detail state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 97 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_DETAILS_MESSAGE

#define CANTX_BMS_STATE_DETAILS_MESSAGE

Value:

    {                                                                                          \
        .id         = CANTX_BMS_STATE_DETAILS_ID,                                              \
        .idType     = CANTX_BMS_STATE_DETAILS_ID_TYPE,                                         \
        .dlc        = CAN_DEFAULT_DLC,                                                         \
        .endianness = CANTX_BMS_STATE_DETAILS_ENDIANNESS,                                      \
    },                                                                                         \
    {                                                                                          \
        .period = CANTX_BMS_STATE_DETAILS_PERIOD_ms, .phase = CANTX_BMS_STATE_DETAILS_PHASE_ms \
    }

Definition at line 265 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_DETAILS_PERIOD_ms

#define CANTX_BMS_STATE_DETAILS_PERIOD_ms   (1000u)

CAN message properties for BMS detail state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 98 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_DETAILS_PHASE_ms

#define CANTX_BMS_STATE_DETAILS_PHASE_ms   (100u)

CAN message properties for BMS detail state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 99 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_ENDIANNESS

#define CANTX_BMS_STATE_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for BMS state message. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 88 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_ID

#define CANTX_BMS_STATE_ID   (0x220u)

CAN message properties for BMS state message. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 84 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_ID_TYPE

#define CANTX_BMS_STATE_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for BMS state message. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 85 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_MESSAGE

#define CANTX_BMS_STATE_MESSAGE

Value:

    {                                                                          \
        .id         = CANTX_BMS_STATE_ID,                                      \
        .idType     = CANTX_BMS_STATE_ID_TYPE,                                 \
        .dlc        = CAN_DEFAULT_DLC,                                         \
        .endianness = CANTX_BMS_STATE_ENDIANNESS,                              \
    },                                                                         \
    {                                                                          \
        .period = CANTX_BMS_STATE_PERIOD_ms, .phase = CANTX_BMS_STATE_PHASE_ms \
    }

Definition at line 254 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_PERIOD_ms

#define CANTX_BMS_STATE_PERIOD_ms   (100u)

CAN message properties for BMS state message. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 86 of file can_cfg_tx-message-definitions.h.

CANTX_BMS_STATE_PHASE_ms

#define CANTX_BMS_STATE_PHASE_ms   (0u)

CAN message properties for BMS state message. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 87 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_ENDIANNESS

#define CANTX_CELL_TEMPERATURES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for BMS cell temperatures. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 124 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_ID

#define CANTX_CELL_TEMPERATURES_ID   (0x250u)

CAN message properties for BMS cell temperatures. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 120 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_ID_TYPE

#define CANTX_CELL_TEMPERATURES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for BMS cell temperatures. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 121 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_MESSAGE

#define CANTX_CELL_TEMPERATURES_MESSAGE

Value:

    {                                                                                          \
        .id         = CANTX_CELL_TEMPERATURES_ID,                                              \
        .idType     = CANTX_CELL_TEMPERATURES_ID_TYPE,                                         \
        .dlc        = CAN_DEFAULT_DLC,                                                         \
        .endianness = CANTX_CELL_TEMPERATURES_ENDIANNESS,                                      \
    },                                                                                         \
    {                                                                                          \
        .period = CANTX_CELL_TEMPERATURES_PERIOD_ms, .phase = CANTX_CELL_TEMPERATURES_PHASE_ms \
    }

Definition at line 309 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_PERIOD_ms

#define CANTX_CELL_TEMPERATURES_PERIOD_ms   (200u)

CAN message properties for BMS cell temperatures. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 122 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_TEMPERATURES_PHASE_ms

#define CANTX_CELL_TEMPERATURES_PHASE_ms   (20u)

CAN message properties for BMS cell temperatures. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 123 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_ENDIANNESS

#define CANTX_CELL_VOLTAGES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for BMS cell voltages. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 112 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_ID

#define CANTX_CELL_VOLTAGES_ID   (0x240u)

CAN message properties for BMS cell voltages. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 108 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_ID_TYPE

#define CANTX_CELL_VOLTAGES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for BMS cell voltages. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 109 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_MESSAGE

#define CANTX_CELL_VOLTAGES_MESSAGE

Value:

    {                                                                                  \
        .id         = CANTX_CELL_VOLTAGES_ID,                                          \
        .idType     = CANTX_CELL_VOLTAGES_ID_TYPE,                                     \
        .dlc        = CAN_DEFAULT_DLC,                                                 \
        .endianness = CANTX_CELL_VOLTAGES_ENDIANNESS,                                  \
    },                                                                                 \
    {                                                                                  \
        .period = CANTX_CELL_VOLTAGES_PERIOD_ms, .phase = CANTX_CELL_VOLTAGES_PHASE_ms \
    }

Definition at line 276 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_PERIOD_ms

#define CANTX_CELL_VOLTAGES_PERIOD_ms   (100u)

CAN message properties for BMS cell voltages. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 110 of file can_cfg_tx-message-definitions.h.

CANTX_CELL_VOLTAGES_PHASE_ms

#define CANTX_CELL_VOLTAGES_PHASE_ms   (10u)

CAN message properties for BMS cell voltages. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 111 of file can_cfg_tx-message-definitions.h.

CANTX_DEBUG_IDENTIFIER

#define CANTX_DEBUG_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)

Definition at line 69 of file can_cfg_tx-message-definitions.h.

CANTX_DEBUG_RESPONSE_ID

#define CANTX_DEBUG_RESPONSE_ID   (0x227u) /* check_ids:not-periodic */

CAN message ID for debug response message

Definition at line 68 of file can_cfg_tx-message-definitions.h.

CANTX_FATAL_ERRORS_ID

#define CANTX_FATAL_ERRORS_ID   (0x0FFu) /* check_ids:not-periodic */

CAN message ID for fatal errors

Definition at line 76 of file can_cfg_tx-message-definitions.h.

CANTX_FATAL_ERRORS_IDENTIFIER

#define CANTX_FATAL_ERRORS_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)

Definition at line 77 of file can_cfg_tx-message-definitions.h.

CANTX_IMD_ID_TYPE

#define CANTX_IMD_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message identifier type

Definition at line 246 of file can_cfg_tx-message-definitions.h.

CANTX_IMD_REQUEST_ID

#define CANTX_IMD_REQUEST_ID   (0x22u)

----------------------—CAUTION----------------------— The following defines are used by the insulation monitoring device (IMD). If they are changed, the IMD will not work anymore ----------------------—CAUTION----------------------— CAN message ID for request message to iso165c

Definition at line 244 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_ENDIANNESS

#define CANTX_LIMIT_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for BMS limit values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 136 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_ID

#define CANTX_LIMIT_VALUES_ID   (0x224u)

CAN message properties for BMS limit values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 132 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_ID_TYPE

#define CANTX_LIMIT_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for BMS limit values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 133 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_MESSAGE

#define CANTX_LIMIT_VALUES_MESSAGE

Value:

    {                                                                                \
        .id         = CANTX_LIMIT_VALUES_ID,                                         \
        .idType     = CANTX_LIMIT_VALUES_ID_TYPE,                                    \
        .dlc        = CAN_DEFAULT_DLC,                                               \
        .endianness = CANTX_LIMIT_VALUES_ENDIANNESS,                                 \
    },                                                                               \
    {                                                                                \
        .period = CANTX_LIMIT_VALUES_PERIOD_ms, .phase = CANTX_LIMIT_VALUES_PHASE_ms \
    }

Definition at line 298 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_PERIOD_ms

#define CANTX_LIMIT_VALUES_PERIOD_ms   (100u)

CAN message properties for BMS limit values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 134 of file can_cfg_tx-message-definitions.h.

CANTX_LIMIT_VALUES_PHASE_ms

#define CANTX_LIMIT_VALUES_PHASE_ms   (30u)

CAN message properties for BMS limit values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 135 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_ENDIANNESS

#define CANTX_MINIMUM_MAXIMUM_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 148 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_ID

#define CANTX_MINIMUM_MAXIMUM_VALUES_ID   (0x223u)

CAN message properties for minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 144 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_ID_TYPE

#define CANTX_MINIMUM_MAXIMUM_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 145 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_MESSAGE

#define CANTX_MINIMUM_MAXIMUM_VALUES_MESSAGE

Value:

    {                                                                                                    \
        .id         = CANTX_MINIMUM_MAXIMUM_VALUES_ID,                                                   \
        .idType     = CANTX_MINIMUM_MAXIMUM_VALUES_ID_TYPE,                                              \
        .dlc        = CAN_DEFAULT_DLC,                                                                   \
        .endianness = CANTX_MINIMUM_MAXIMUM_VALUES_ENDIANNESS,                                           \
    },                                                                                                   \
    {                                                                                                    \
        .period = CANTX_MINIMUM_MAXIMUM_VALUES_PERIOD_ms, .phase = CANTX_MINIMUM_MAXIMUM_VALUES_PHASE_ms \
    }

Definition at line 287 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_PERIOD_ms

#define CANTX_MINIMUM_MAXIMUM_VALUES_PERIOD_ms   (100u)

CAN message properties for minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 146 of file can_cfg_tx-message-definitions.h.

CANTX_MINIMUM_MAXIMUM_VALUES_PHASE_ms

#define CANTX_MINIMUM_MAXIMUM_VALUES_PHASE_ms   (40u)

CAN message properties for minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 147 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_ENDIANNESS

#define CANTX_PACK_STATE_ESTIMATION_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for pack state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 160 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_ID

#define CANTX_PACK_STATE_ESTIMATION_ID   (0x225u)

CAN message properties for pack state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 156 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_ID_TYPE

#define CANTX_PACK_STATE_ESTIMATION_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for pack state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 157 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_MESSAGE

#define CANTX_PACK_STATE_ESTIMATION_MESSAGE

Value:

    {                                                                                                  \
        .id         = CANTX_PACK_STATE_ESTIMATION_ID,                                                  \
        .idType     = CANTX_PACK_STATE_ESTIMATION_ID_TYPE,                                             \
        .dlc        = CAN_DEFAULT_DLC,                                                                 \
        .endianness = CANTX_PACK_STATE_ESTIMATION_ENDIANNESS,                                          \
    },                                                                                                 \
    {                                                                                                  \
        .period = CANTX_PACK_STATE_ESTIMATION_PERIOD_ms, .phase = CANTX_PACK_STATE_ESTIMATION_PHASE_ms \
    }

Definition at line 320 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_PERIOD_ms

#define CANTX_PACK_STATE_ESTIMATION_PERIOD_ms   (1000u)

CAN message properties for pack state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 158 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_STATE_ESTIMATION_PHASE_ms

#define CANTX_PACK_STATE_ESTIMATION_PHASE_ms   (50u)

CAN message properties for pack state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 159 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_ENDIANNESS

#define CANTX_PACK_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for pack values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 172 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_ID

#define CANTX_PACK_VALUES_ID   (0x222u)

CAN message properties for pack values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 168 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_ID_TYPE

#define CANTX_PACK_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for pack values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 169 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_MESSAGE

#define CANTX_PACK_VALUES_MESSAGE

Value:

    {                                                                              \
        .id         = CANTX_PACK_VALUES_ID,                                        \
        .idType     = CANTX_PACK_VALUES_ID_TYPE,                                   \
        .dlc        = CAN_DEFAULT_DLC,                                             \
        .endianness = CANTX_PACK_VALUES_ENDIANNESS,                                \
    },                                                                             \
    {                                                                              \
        .period = CANTX_PACK_VALUES_PERIOD_ms, .phase = CANTX_PACK_VALUES_PHASE_ms \
    }

Definition at line 331 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_PERIOD_ms

#define CANTX_PACK_VALUES_PERIOD_ms   (100u)

CAN message properties for pack values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 170 of file can_cfg_tx-message-definitions.h.

CANTX_PACK_VALUES_PHASE_ms

#define CANTX_PACK_VALUES_PHASE_ms   (60u)

CAN message properties for pack values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 171 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_ENDIANNESS

#define CANTX_STRING_MIN_MAX_VALUES_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for string minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 222 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_ID

#define CANTX_STRING_MIN_MAX_VALUES_ID   (0x281u)

CAN message properties for string minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 218 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_ID_TYPE

#define CANTX_STRING_MIN_MAX_VALUES_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for string minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 219 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_MESSAGE

#define CANTX_STRING_MIN_MAX_VALUES_MESSAGE

Value:

    {                                                                                                  \
        .id         = CANTX_STRING_MIN_MAX_VALUES_ID,                                                  \
        .idType     = CANTX_STRING_MIN_MAX_VALUES_ID_TYPE,                                             \
        .dlc        = CAN_DEFAULT_DLC,                                                                 \
        .endianness = CANTX_STRING_MIN_MAX_VALUES_ENDIANNESS,                                          \
    },                                                                                                 \
    {                                                                                                  \
        .period = CANTX_STRING_MIN_MAX_VALUES_PERIOD_ms, .phase = CANTX_STRING_MIN_MAX_VALUES_PHASE_ms \
    }

Definition at line 375 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_PERIOD_ms

#define CANTX_STRING_MIN_MAX_VALUES_PERIOD_ms   (100u)

CAN message properties for string minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 220 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_MIN_MAX_VALUES_PHASE_ms

#define CANTX_STRING_MIN_MAX_VALUES_PHASE_ms   (90u)

CAN message properties for string minimum and maximum values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 221 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ENDIANNESS

#define CANTX_STRING_STATE_ENDIANNESS   (CAN_BIG_ENDIAN)

TX messages - string related CAN message properties for string state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 186 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_ENDIANNESS

#define CANTX_STRING_STATE_ESTIMATION_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for string state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 234 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_ID

#define CANTX_STRING_STATE_ESTIMATION_ID   (0x282u)

CAN message properties for string state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 230 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_ID_TYPE

#define CANTX_STRING_STATE_ESTIMATION_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for string state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 231 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_MESSAGE

#define CANTX_STRING_STATE_ESTIMATION_MESSAGE

Value:

    {                                                                                                      \
        .id         = CANTX_STRING_STATE_ESTIMATION_ID,                                                    \
        .idType     = CANTX_STRING_STATE_ESTIMATION_ID_TYPE,                                               \
        .dlc        = CAN_DEFAULT_DLC,                                                                     \
        .endianness = CANTX_STRING_STATE_ESTIMATION_ENDIANNESS,                                            \
    },                                                                                                     \
    {                                                                                                      \
        .period = CANTX_STRING_STATE_ESTIMATION_PERIOD_ms, .phase = CANTX_STRING_STATE_ESTIMATION_PHASE_ms \
    }

Definition at line 386 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_PERIOD_ms

#define CANTX_STRING_STATE_ESTIMATION_PERIOD_ms   (1000u)

CAN message properties for string state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 232 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ESTIMATION_PHASE_ms

#define CANTX_STRING_STATE_ESTIMATION_PHASE_ms   (0u)

CAN message properties for string state estimation values. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 233 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ID

#define CANTX_STRING_STATE_ID   (0x221u)

TX messages - string related CAN message properties for string state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 182 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_ID_TYPE

#define CANTX_STRING_STATE_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

TX messages - string related CAN message properties for string state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 183 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_MESSAGE

#define CANTX_STRING_STATE_MESSAGE

Value:

    {                                                                                \
        .id         = CANTX_STRING_STATE_ID,                                         \
        .idType     = CANTX_STRING_STATE_ID_TYPE,                                    \
        .dlc        = CAN_DEFAULT_DLC,                                               \
        .endianness = CANTX_STRING_STATE_ENDIANNESS,                                 \
    },                                                                               \
    {                                                                                \
        .period = CANTX_STRING_STATE_PERIOD_ms, .phase = CANTX_STRING_STATE_PHASE_ms \
    }

Definition at line 342 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_PERIOD_ms

#define CANTX_STRING_STATE_PERIOD_ms   (100u)

TX messages - string related CAN message properties for string state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 184 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_STATE_PHASE_ms

#define CANTX_STRING_STATE_PHASE_ms   (70u)

TX messages - string related CAN message properties for string state. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 185 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_ENDIANNESS

#define CANTX_STRING_VALUES_P0_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for string values part 0. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 198 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_ID

#define CANTX_STRING_VALUES_P0_ID   (0x280u)

CAN message properties for string values part 0. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 194 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_ID_TYPE

#define CANTX_STRING_VALUES_P0_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for string values part 0. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 195 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_MESSAGE

#define CANTX_STRING_VALUES_P0_MESSAGE

Value:

    {                                                                                        \
        .id         = CANTX_STRING_VALUES_P0_ID,                                             \
        .idType     = CANTX_STRING_VALUES_P0_ID_TYPE,                                        \
        .dlc        = CAN_DEFAULT_DLC,                                                       \
        .endianness = CANTX_STRING_VALUES_P0_ENDIANNESS,                                     \
    },                                                                                       \
    {                                                                                        \
        .period = CANTX_STRING_VALUES_P0_PERIOD_ms, .phase = CANTX_STRING_VALUES_P0_PHASE_ms \
    }

Definition at line 353 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_PERIOD_ms

#define CANTX_STRING_VALUES_P0_PERIOD_ms   (100u)

CAN message properties for string values part 0. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 196 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P0_PHASE_ms

#define CANTX_STRING_VALUES_P0_PHASE_ms   (80u)

CAN message properties for string values part 0. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 197 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_ENDIANNESS

#define CANTX_STRING_VALUES_P1_ENDIANNESS   (CAN_BIG_ENDIAN)

CAN message properties for string values part 1. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 210 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_ID

#define CANTX_STRING_VALUES_P1_ID   (0x283u)

CAN message properties for string values part 1. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 206 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_ID_TYPE

#define CANTX_STRING_VALUES_P1_ID_TYPE   (CAN_STANDARD_IDENTIFIER_11_BIT)

CAN message properties for string values part 1. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 207 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_MESSAGE

#define CANTX_STRING_VALUES_P1_MESSAGE

Value:

    {                                                                                        \
        .id         = CANTX_STRING_VALUES_P1_ID,                                             \
        .idType     = CANTX_STRING_VALUES_P1_ID_TYPE,                                        \
        .dlc        = CAN_DEFAULT_DLC,                                                       \
        .endianness = CANTX_STRING_VALUES_P1_ENDIANNESS,                                     \
    },                                                                                       \
    {                                                                                        \
        .period = CANTX_STRING_VALUES_P1_PERIOD_ms, .phase = CANTX_STRING_VALUES_P1_PHASE_ms \
    }

Definition at line 364 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_PERIOD_ms

#define CANTX_STRING_VALUES_P1_PERIOD_ms   (100u)

CAN message properties for string values part 1. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 208 of file can_cfg_tx-message-definitions.h.

CANTX_STRING_VALUES_P1_PHASE_ms

#define CANTX_STRING_VALUES_P1_PHASE_ms   (10u)

CAN message properties for string values part 1. Required properties are:

• Message ID
• Identifier type (standard or extended)
• Message period and phase in ms
• Endianness of message data

Definition at line 209 of file can_cfg_tx-message-definitions.h.

CANTX_UNSUPPORTED_MULTIPLEXER_IDENTIFIER

#define CANTX_UNSUPPORTED_MULTIPLEXER_IDENTIFIER   (CAN_STANDARD_IDENTIFIER_11_BIT)

Definition at line 73 of file can_cfg_tx-message-definitions.h.

CANTX_UNSUPPORTED_MULTIPLEXER_VAL_ID

#define CANTX_UNSUPPORTED_MULTIPLEXER_VAL_ID   (0x201u) /* check_ids:not-periodic */

CAN message ID for unsupported multiplexer values in messages

Definition at line 72 of file can_cfg_tx-message-definitions.h.